Processor	80386DX
Processor Speed	20MHz
Chip Set	Micronics
Max. Onboard DRAM	Dependant upon the memory card installed
Cache	16KB (on M100C and M400C system memory cards only)
BIOS	Phoenix
Dimensions	355mm x 304mm
I/O Options	32-bit external memory card slot
NPU Options	80287

CONNECTIONS
Purpose	Location	Purpose	Location
External battery	J1	Reset switch	W1
Power LED & keylock	J21	32-bit external memory card slot	S1
Speaker	J22

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	Factory configured - do not alter	SW1/1	On
»	NPU disabled	SW1/2	Off
	NPU enabled	SW1/2	On
»	BIOS relocation enabled	SW1/4	On
	BIOS relocation disabled	SW1/4	Off
»	Factory configured - do not alter	SW1/5	Off
»	Monitor type select color	SW1/6	On
	Monitor type select monochrome	SW1/6	Off
»	Cache enabled	SW1/7	On
	Cache disabled	SW1/7	Off
»	Factory configured - do not alter	SW1/8	Off
»	Factory configured - do not alter	W5	Closed
Note: SW1/7 should read as follows; if the M100C or M400C memory card is installed: to enable cache leave On, to disable cache leave Off. If the M100, M200 or M300 is installed, SW1/7 should be left in the Off position.

DRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(36) 41256	NONE
2MB	(36) 41256	(36) 41256

DRAM JUMPER CONFIGURATION
Size	W1
1MB	pins 2 & 3, 4 & 5, 7 & 8 closed
2MB	pins 1 & 2, 4 & 5, 7 & 8 closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
4MB	(36) 411000	None
8MB	(36) 411000	(36) 411000

DRAM JUMPER CONFIGURATION
Size	W1	W2	W3	W4	W5
4MB	Closed	Closed	Open	Open	Open
8MB	Open	Closed	Open	Open	Open

DRAM CONFIGURATION
Size	Bank 0	Bank 1
2MB	(24) 44256	NONE
6MB	(24) 44256	(36) 411000

DRAM JUMPER CONFIGURATION
Size	SW1	SW2	SW3	SW4	SW5	SW6	SW7	SW8
2MB	Off	Off	On	Off	On	On	Off	On
6MB	Off	On	On	Off	On	On	Off	On

DRAM CONFIGURATION M100C
Size	Bank 0	Bank 1
1MB	(36) 41256	NONE
2MB	(36) 41256	(36) 41256

DRAM JUMPER CONFIGURATION M100C
Size	W1	W3
4MB	Pins 1 & 2 closed	Closed
8MB	Pins 2 & 3 closed	Closed

DRAM CONFIGURATION M400C
Size	Bank 0	Bank 1
4MB	(36) 411000	NONE
8MB	(36) 411000	(36) 411000

DRAM JUMPER CONFIGURATION M400C
Size	W1	W3
4MB	Pins 1 & 2 closed	Closed
8MB	Pins 2 & 3 closed	Closed