Processor	80386SX
Processor Speed	20/25/33MHz
Chip Set	Unidentified
Max. Onboard DRAM	16MB (on external memory card)
Cache	32/64KB
BIOS	Phoenix
Dimensions	355mm x 305mm
I/O Options	External memory card
NPU Options	80387SX/3167

CONNECTIONS
Purpose	Location	Purpose	Location
External battery	J2	Turbo LED	W9
Power LED & keylock	J21	Turbo switch	W15
Speaker	J22	External memory card	SL1
Reset switch	W1

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	Factory configured - do not alter	SW1/1	On
»	NPU disabled	SW1/2	Off
	NPU enabled	SW1/2	On
»	Factory configured - do not alter	SW1/3	Off
»	EGA/BIOS relocated	SW1/4	On
	EGA/BIOS not relocated	SW1/4	Off
»	Factory configured - do not alter	SW1/5	Off
»	Monitor type select CGA/EGA/VGA	SW1/6	On
	Monitor type select monochrome	SW1/6	Off
»	Cache enabled	SW1/7	On
	Cache disabled	SW1/7	Off
»	Bus speed select low	SW1/8	Off
	Bus speed select high	SW1/8	On
»	Factory configured - do not alter	W3	Closed
»	Factory configured - do not alter	W4	Open
»	Factory configured - do not alter	W5	Open
»	Factory configured - do not alter	W6	Open
»	Factory configured - do not alter	W10	Open
»	Non cacheable region at E0000 to EFFFF	W22	Closed
	Non cacheable region at D0000 to DFFFF	W22	Open
»	Factory configured - do not alter	W23	N/A
Note: The location of jumpers W4, W5, W6, & W10 are unidentified.

CACHE CONFIGURATION
Size	Bank 0	Bank 1
32KB	(4) 8K x 8	NONE
64KB	(4) 8K x 8	(4) 8K x 8

CACHE JUMPER CONFIGURATION
Setting	W12	W13
Direct map	Closed	pins 1 & 2 closed
Two way set	Open	pins 2 & 3 closed

NPU CONFIGURATION
Setting	W7	W8
Asynchronous	pins 1 & 2 closed	Closed
Synchronous	pins 2 & 3 closed	Open

CONNECTIONS
Purpose	Location
Proprietary memory expansion connector	CN1

DRAM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(36) 41256	NONE
2MB	(36) 41256	(36) 41256
4MB	(36) 411000	NONE
5MB	(36) 41256	(36) 411000
8MB	(36) 411000	(36) 411000
Note: Expansion card has a maximum of 8MB. To install 12MB or 16MB, install memory card at CN1.

DRAM SWITCH CONFIGURATION
Size	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8
1MB	On	Off	On	On	On	Off	Off	Off
2MB	Off	On	On	On	On	Off	Off	Off
4MB	On	On	Off	Off	On	Off	Off	Off
5MB	Off	Off	Off	On	On	Off	Off	Off
8MB	Off	On	Off	Off	On	Off	Off	Off
12MB	Off	Off	Off	Off	On	Off	Off	Off
16MB	Off	Off	Off	Off	On	Off	Off	Off
Note: These chips are board specific. Refer to manual for proper chip sizes.

CONNECTIONS
Purpose	Location
Proprietary memory expansion connector	CN1

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2
1MB	(16) 44256	NONE	NONE
2MB	(16) 44256	(8) 44256	NONE
5MB	(16) 44256	NONE	(36) 411100
6MB	(16) 44256	(8) 44256	(36) 411100
Note: Expansion card has a maximum of 6MB. To install 16MB, install memory card at CN1.

DRAM SWITCH CONFIGURATION
Size	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8
1MB	Off	Off	Off	Off	On	On	On	On
2MB	Off	Off	Off	On	On	On	On	On
5MB	Off	On	On	Off	On	Off	On	On
6MB	Off	On	Off	On	On	On	On	On
16MB	On	On	On	On	On	On	On	On
Note: These chips are board specific. Refer to manual for proper chip sizes.