Processor	80286
Speed	8/10/12MHz
Chip Set	Zymos
Max. Onboard DRAM	1MB
Cache	None
BIOS	Sanyo
Dimensions	332mm x 136mm
I/O Options	Serial port,. parallel port, floppy drive interface
NPU Options	80287

CONNECTIONS
Purpose	Location	Purpose	Location
Speaker & I/O LED	CN1	Floppy drive interface	CN6
Keylock	CN2	Serial port	CN7
Keyboard plug	CN4	Parallel port	CN8
External batteries	CN5 & CN9	Reset	SW2

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	Floppy drive interface enabled	J1	pins 2 & 3 closed
	Floppy drive interface disabled	J1	Open
»	Serial port IRQ select primary	J2	pins 2 & 3 closed
	Serial port IRQ select secondary	J2	pins 1 & 2 closed
	Serial port disabled	J2	Open
»	Parallel port IRQ select primary	J3	pins 2 & 3 closed
	Parallel port IRQ select secondary	J3	pins 1 & 2 closed
	Parallel port disabled	J3	pins 1 & 2 closed
»	Serial port address select primary	J4	pins 2 & 3 closed
	Serial port address select secondary	J4	pins 1 & 2 closed
	Serial port disabled	J4	pins 1 & 2 closed
»	Parallel port address select primary	J5	pins 2 & 3 closed
	Parallel port address select secondary	J5	pins 1 & 2 closed
	Parallel port disabled	J5	Open
»	Factory configured - do not alter	J6	pins 1 & 2 closed
»	DRAM speed select 5 wait states	J7	pins 1 & 2 closed
	DRAM speed select 4 wait states	J7	pins 2 & 3 closed
»	NPU disabled	SW1/1	On
	NPU enabled	SW1/1	Off
»	Factory configured - do not alter	SW1/3	N/A
»	Display type select color	SW1/4	On
	Display type select monochrome	SW1/4	Off
»	Factory configured - do not alter	SW1/5	Off
»	CPU speed select fast	SW1/6	On
	CPU speed select slow	SW1/6	Off
»	Factory configured - do not alter	TP1	N/A

DRAM CONFIGURATION
Size	Bank 0	P-0	Bank 1	P-1
512KB	(4) 44256	(2) 41256	NONE	NONE
1MB	(4) 44256	(2) 41256	(4) 44256	(2) 41256

DRAM SWITCH CONFIGURATION
Size	SW2/2
512KB	Off
1MB	On

BIOS CONFIGURATION
Size	J8	J9
27128	pins 2 & 3 closed	pins 2 & 3 closed
27256	pins 2 & 3 closed	pins 1 & 2 closed
27512	pins 1 & 2 closed	pins 1 & 2 closed