Processor	80386SX (exact location unidentified)
Processor Speed	20/25MHz
Chip Set	Unidentified
Maximum Onboard Memory	10MB (on external memory card)
Cache	None
BIOS	Unidentified
Dimensions	228mm x 220mm
I/O Options	External memory card
NPU Options	80387SX (exact location unidentified)

CONNECTIONS
Function	Label	Function	Label
External battery	X1	Turbo LED	x8
Reset switch	X4	Speaker	X17
Status port	X5	Turbo switch	X22
Power LED & keylock	x6	External memory card	SL1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Speed select through keyboard	S1	Pins 2 & 3 closed
	Speed select through turbo switch	S1	Pins 1 & 2 closed
»	I/O slot wait state select 4 wait states	S2	Pins 1 & 2 closed
	I/O slot wait state select 6 wait states	S2	Pins 2 & 3 closed
»	Factory configured - do not alter	S5	N/A
»	Factory configured - do not alter	SW1/1	N/A
»	NPU disabled	SW1/2	Off
	NPU enabled	SW1/2	On
»	Floppy drive speed does not affect CPU speed	SW1/3	Off
	Floppy drive speed at CPU speed 8MHz	SW1/3	On
»	Monitor type select monochrome	SW1/4	Off
	Monitor type select color	SW1/4	On
»	Factory configured - do not alter	X23	N/A

DRAM
Size	Bank 0	Bank 1	Bank 2	Bank 3
1MB	1MB kit	None	None	None
1MB	1MB kit	None	None	None
2MB	1MB kit	None	1MB kit	None
2MB	1MB kit	None	1MB kit	None
4MB	None	4MB kit	None	None
5MB	1MB kit	4MB kit	None	None
6MB	1MB kit	4MB kit	1MB kit	None
6MB	1MB kit	4MB kit	1MB kit	None
8MB	None	4MB kit	None	4MB module
9MB	1MB kit	4MB kit	None	4MB module
10MB	1MB kit	4MB kit	1MB kit	4MB module
10MB	1MB kit	4MB kit	1MB kit	4MB module
Note: Banks are located on the external memory card.

DRAM SWITCH
Size	SW1/5	SW1/6	SW1/7	SW1/8
1MB	On	On	On	On
1MB	On	On	On	Off
2MB	On	On	Off	On
2MB	On	On	Off	Off
4MB	On	Off	On	On
5MB	On	Off	On	Off
6MB	On	Off	Off	On
6MB	On	Off	Off	Off
8MB	Off	On	On	On
9MB	Off	On	On	Off
10MB	Off	On	Off	On
10MB	Off	On	Off	Off

BIOS
Setting	S3	S4
27128	Pins 1 & 2 closed	Pins 1 & 2 closed
27256	Pins 2 & 3 closed	Pins 1 & 2 closed
27512	Pins 2 & 3 closed	Pins 2 & 3 closed

MISCELLANEOUS TECHNICAL NOTE

The location of pin 1 on all jumpers and the switch is unidentified.