...because we can't all be on the bleeding edge...





AST ETHERNODE (202246-001)

AST RESEARCH, INC.

AST ETHERNODE (202246-001)

Transfer Rate

10Mbps

Data Bus

8-bit ISA

Topology

Linear bus

Wiring Type

RG-58A/U 50ohm coaxial

AUI transceiver via DB-15 port

Boot ROM

Not available

SLEEP MODE

Setting

E2

Disabled

Closed

 

Enabled

Open

Note: When sleep mode is enabled the card is disabled. The card cannot be accessed by the computer or the network. This option is provided to simplify trouble shooting system conflicts.

CABLE TYPE

Type

E3

E4

RG-58A/U 50ohm coaxial

Open

Closed

 

AUI transceiver via DB-15 port

Closed

Open

Note:E3 and E4 are not jumpers, they are receptacles for a terminating resistor. In this case open means that the resistor is not installed while closed would mean that the resistor is installed.

CARD ID

Setting

E5

E6

E7

E8

A

Closed

Open

Open

Open

 

B

Open

Closed

Open

Open

 

C

Open

Open

Closed

Open

 

D

Open

Open

Open

Closed

Note: Up to four cards can be installed at once into the same system. If more than one card is installed in the
system, each must have a distinct ID.

FACTORY CONFIGURED SETTINGS

Jumper

Setting

E1

Closed

MISCELLANEOUS NOTES

To completely configure this card, the software that comes with it must be used..