NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16/32-bit MCA
Topology	Star Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Not Available

CABLE TYPE
Type		Switch PSS	JP2
»	RG-58A/U 50ohm coaxial	On	Pins 2 & 3 Closed
	AUI transceiver via DB-15 port	Off	Pins 1 & 2 Closed
Note:JP2 is used to enabled the DC converter on the card to supply power to coaxial networks.

SIGNAL QUALITY ERROR (SQE) TEST
Setting		Switch SQE
»	Disabled	Off
	Enabled	On
Note:Signal Quality Error (SQE) is a test of the collision circuitry and path.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
1	Green	On/Blinking	Data is being transmitted
1	Green	Off	Data is not being transmitted
2	Red	On/Blinking	Collision detected on network
2	Red	Off	Normal operation
3	Yellow	On/Blinking	Data is being received
3	Yellow	Off	Data is not being received
4	Green	On	Card is receiving power
4	Green	Off	Card is not receiving power