Card Type	Network Interface Card
NIC Type	FDDI
Maximum Onboard Memory	Unidentified
Boot ROM	Available
Network Transfer Rate	100Mbps
Topology	Ring
Wiring Type	Fiber optic cable
Data Bus	32-bit PCI

CONNECTIONS
Function	Label	Function	Label
LCF transceiver 2	CN1	LCF transceiver 1	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Boot ROM disabled	JP13/A	Open
	Boot ROM enabled	JP13/A	Closed
»	Factory configured - do not alter	JP13/E	Unidentified
»	Factory configured - do not alter	JP3	Unidentified

BASE I/O ADDRESS SELECTION
Address		JP13/B	JP13/C	JP13/D
	200h-21Fh	Closed	Closed	Closed
	220h-23Fh	Closed	Closed	Open
	240h-25Fh	Closed	Open	Closed
	280h-29Fh	Closed	Open	Open
»	300h-31Fh	Open	Closed	Closed
	320h-33Fh	Open	Closed	Open
	340h-35Fh	Open	Open	Closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	LCF 1 status (see conditions in note below)
LED2	Unidentified	Off	LCF 2 status (see conditions in note below)
LED3	Green	On	Ring connection is good
LED3	Green	Off	Ring connection is broken
LED4	Yellow	On	Data is being transmitted/received
LED4	Yellow	Off	Data is not being transmitted/received
Note: LED1 and LED2 vary depending on model. Red (On: Illegal connection, Off: Valid connection); or Orange (On: Line error alarm activated, Off: Line error alarm not activated).

DAUGHTER BOARD USER CONFIGURABLE SETTINGS

Note: JP14 and JP16 are unidentified.