NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit MCA
Topology	Star
Wiring Type	Shielded/Unshielded twisted pair AUI transceiver via DB-15 port

LINK INTEGRITY TEST
Setting		JP31
»	Enabled	Pins 1 & 2 Closed
	Disabled	Pins 2 & 3 Closed
Note:Link Integrity is only used with 10Base-T wiring. When using an AUI transciever, the test should be disabled.

CABLE TYPE SELECT
Type		JP1
»	Shielded/Unshielded twisted pair	Pins 1 & 2 Closed
	AUI transceiver via DB-15 port	Pins 2 & 3 Closed

DIAGNOSTIC LED(S)
Status	Condition
Jabber LED (1) on (Red)	Adapter is continually sending random data
Link test LED (2) on (Green)	Network connection good
Link test LED (2) blinks (Green)	Wiring error, disabled test jumper
Transmit LED (3) blinks (Red)	Data is being transmitted
Receive LED (4) blinks (Red)	Data is being received

MISCELLANEOUS NOTES

Different drivers must be used for the National & the Fujitsu chipset cards, & are not interchangeable. Fujitsu adapters may be used for either 8 or 16 bit Fujitsu cards. While the National chipset cards require a different driver for an 8 or 16 bit card.