...because we can't all be on the bleeding edge...





G/ETHERNET 32EB ADAPTER

GATEWAY COMMUNICATIONS, INC.

G/ETHERNET 32EB ADAPTER

NIC Type

Ethernet

Transfer Rate

10Mbps

Data Bus

32-bit EISA

Topology

Star

Linear Bus

Wiring Type

Shielded/Unshielded twisted pair

AUI transceiver via DB-15 port

RG-58A/U 50ohm coaxial

Boot ROM

Available

COMPATIBILITY MODE

Setting

JP1

Compatibility off

Pins 2 & 3 Closed

 

Compatibility on

Pins 1 & 2 Closed

Note: Turn off compatibility.If one of the following problems persist after checking all other possibilities;

SYSTEM SPEED

Setting

JP2

System speed 50MHz or faster

Pins 1 & 2 Closed

 

System speed slower then 50MHz

Pins 2 & 3 Closed

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

1

Yellow

On

Data is being transmitted

1

Green

On

Data is being received

2

Red

On

Adapter is continually sending random data

2

Green

On

Network is connection good

MISCELLANEOUS NOTES

Different drivers must be used for the National & the Fujitsu chipset cards & are not interchangeable. Fujitsu drivers may be used for either 8 or 16 bit Fujitsu cards. While the National chipset cards require a different driver for an 8 or 16 bit card.