...because we can't all be on the bleeding edge...





SHIVA ETHERPORT IIT

EAGLE TECHNOLOGY

SHIVA ETHERPORT IIT

NIC Type

Ethernet

Transfer Rate

10Mbps

Data Bus

NuBus

Topology

Linear Bus

Wiring Type

Unshielded twisted pair

Boot ROM

Not Available

CABLE TYPE

Cable type is automatically determined by the card. If both the RJ45 and AUI ports are used, the card will default to RJ45.

FACTORY CONFIGURED SETTINGS

Jumper

Setting

SW1/Switch 1

Off

SIGNAL QUALITY

Setting

SW1/Switch 2

 

Signal quality test enabled

Off

Signal quality test diabled

On

LINK INTEGRITY

Function

SW1/Switch 3

Link intergity enabled

Off

 

Link integrity disabled

On

Note: If card is used in a pre-10BaseT cabling network, disable the link integrity function.

REVERSED POLARITY CORRECTION

Setting

SW1/Switch 4

Reverse polarity correction enabled

Off

 

Reverse polarity correction disabled

On

DIAGNOSTIC LED(S)

L1

Condition

On

10BaseT link integrity exists

Off

10BaseT link integrity broken