NIC Type	Ethernet
Network Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus
Wiring Type	RG-58A/U 50ohm coaxial
Boot ROM	Available (location unidentified)

CONNECTIONS
Function	Label
RG-58A/U 50ohm coaxial port	CN1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Boot ROM Disabled	JP1/A	Open
	Boot ROM Enabled	JP1/A	Closed
»	Software configuration - Jumperless mode	JP2/A	Closed
	Hardware configuration - Jumpered mode	JP2/A	Open

BASE I/O ADDRESS SELECTION
Address	JP1/E	JP1/F	JP1/G
200h	Closed	Open	Open
220h	Closed	Open	Closed
240h	Closed	Closed	Open
260h	Closed	Closed	Closed
300h	Open	Open	Open
320h	Open	Open	Closed
340h	Open	Closed	Open
360h	Open	Closed	Closed

INTERRUPT SELECTION
IRQ		JP2/B	JP2/C	JP2/D	JP2/E	JP2/F	JP2/G	JP2/H	JP2/I
	2	Closed	Open	Open	Open	Open	Open	Open	Open
»	3	Open	Closed	Open	Open	Open	Open	Open	Open
	4	Open	Open	Closed	Open	Open	Open	Open	Open
	5	Open	Open	Open	Closed	Open	Open	Open	Open
	10	Open	Open	Open	Open	Closed	Open	Open	Open
	11	Open	Open	Open	Open	Open	Closed	Open	Open
	12	Open	Open	Open	Open	Open	Open	Closed	Open
	15	Open	Open	Open	Open	Open	Open	Open	Closed
Note: When setting IRQ leave JP2/A open.

ROM SIZE SELECTION
Size		JP1/B	JP1/C	JP1/D
	C0000h	Open	Open	Open
	C4000h	Open	Open	Closed
»	C8000h	Open	Closed	Open
	CC000h	Open	Closed	Closed
	D0000h	Closed	Open	Open
	D4000h	Closed	Open	Closed
	D8000h	Closed	Closed	Open
	DC000h	Closed	Closed	Closed
Note: When setting Boot ROM Address make sure jumper JP1/A is closed.

TECHNICAL NOTE

Note: The location of the 2 LEDs for network activity is unidentified.