NIC Type	Proprietary
Chip Set	SEEQ DC 8001
Data Bus	8-bit ISA
Network Transfer Rate	1Mbps
Topology	Linear Bus
Wiring Type	Unshielded twisted pair
Boot ROM	Available

CONNECTIONS
Function	Label
Unshielded twisted pair via 3-pin connector	J1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Base I/O address set to 300h	W1	Pins 1 & 2 closed
	Base I/O address set to 310h	W1	Pins 2 & 3 closed

DMA CHANNEL
Setting		W2	W4
»	DMA1	Pins 1 & 2 closed	Pins 1 & 2 closed
	DMA3	Pins 2 & 3 closed	Pins 2 & 3 closed

INTERRUPT
Setting		W3/A	W3/B	W3/C	W3/D	W3/E
»	IRQ2	Closed	Open	Open	Open	Open
	IRQ3	Open	Closed	Open	Open	Open
	IRQ4	Open	Open	Closed	Open	Open
	IRQ5	Open	Open	Open	Closed	Open
	IRQ7	Open	Open	Open	Open	Closed

BOOT ROM ADDRESS
Setting		W5
»	Disabled	Pins 2 & 4 closed
	EC000h	Pins 1 & 2 closed
	EE000h	Pins 2 & 3 closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Card has failed
LED1	Unidentified	Off	Card is operating normally