NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	8/16-bit ISA
Topology	Star
Wiring Type	Unshielded twisted pair (located on external box)
Boot ROM	Not available

CONNECTIONS
Purpose	Location
Daisy-chain cable from another board connector	S1
Physical Media Extender board connector	S2
Daisy-chain cable for this board connector	S3
Proprietary Telco 50-pin connector	S4

EXPANSION CARD CONFIGURATION
Select	W2
HubCard	pins 1 & 2 closed
HubExpander 1	pins 3 & 4 closed
HubExpander 2	pins 5 & 6 closed
HubExpander 3	pins 7 & 8 closed

FACTORY CONFIGURED - DO NOT ALTER
Jumper	Position
W1	Closed

MISCELLANEOUS NOTES

Terminator pack must be placed on last hubexpander card in chain.