NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear bus
Wiring Type	Unshielded twisted pair AUI transceiver via DB-15
Boot ROM	Available

BASE I/O ADDRESS
Address	JP1A	JP1B	JP1C	JP1D
300h	Closed	Open	Open	Open
320h	Open	Closed	Open	Open
340h	Open	Open	Closed	Open
360h	Open	Open	Open	Closed

BOOT ROM ADDRESS
Address	JP2A	JP2B	JP2C	JP2D	JP2E
D0000h	Closed	Open	Open	Open	Open
D4000h	Open	Closed	Open	Open	Open
D8000h	Open	Open	Closed	Open	Open
DC000h	Open	Open	Open	Closed	Open
No Boot ROM	Open	Open	Open	Open	Closed

DMA CHANNEL
Channel	JP3A	JP3B	JP3C	JP3D
DMA0	Closed	Open	Open	Open
DMA3	Open	Closed	Open	Open
DMA5	Open	Open	Closed	Open
DMA6	Open	Open	Open	Closed

INTERRUPT SETTINGS
IRQ	JP4A	JP4B	JP4C	JP4D
2/9	Closed	Open	Open	Open
5	Open	Open	Open	Closed
12	Open	Closed	Open	Open
15	Open	Open	Closed	Open

CABLE TYPE
Type	SW1
Unshielded twisted pair	Position B
AUI transceiver via DB-15 port	Position A

LINK INTEGRITY
Function		W18
»	Link intergity enabled	Pins 1 & 2 closed
	Link integrity disabled	Pins 2 & 3 closed
Note: If card is used in a pre-10BaseT cabling network, disable the link integrity function.

DIAGNOSTIC LED(S)
LED	Condition
On	Link integrity exists
Off	Link integrity does not exist
Note:LED is active only when NIC is used in a 10BaseT network.