STANDARD MICROSYSTEMS CORPORATION
ETHERCARD PLUS ELITE16, ETHERCARD PLUS ELITE16T, ETHERCARD PLUS ELITE16 COMBO
|
NIC Type |
Ethernet |
|
Transfer Rate |
10Mbps |
|
Data Bus |
16-bit ISA |
|
Topology |
Linear Bus Star |
|
Wiring Type |
Unshielded twisted pair (Elite16/Elite16T) RG-58A/U 50ohm coaxial (Elite16/Elite16 Combo) AUI transceiver via DB-15 port |
|
Boot ROM |
Available |
|
NETWORK CARD CONFIGURATION | ||||||
|
Address |
IRQ |
Base Address |
W1A |
W1B |
W1C | |
| » |
280h |
3 |
D0000h |
Open |
Closed |
Open |
|
300h |
10 |
CC000h |
Open |
Open |
Closed | |
|
Software select |
Software select |
Software select |
Closed |
Open |
Open | |
|
BOOT ROM ADDRESS | |||
|
Address |
W2A |
W2B | |
| » |
Software select/None |
Closed |
Open |
|
D8000h |
Open |
Closed | |
|
DIAGNOSTIC LED(S) | ||
|
LED |
Status |
Condition |
|
LED1 |
On |
Data is being transmitted |
|
LED1 |
Off |
Data is not being transmitted |
|
LED2 |
On |
Data is being received |
|
LED2 |
On |
Data is not being received |
|
LED3 |
On |
Receive wire polarity reversed and corrected |
|
LED3 |
Off |
Normal operation |
|
LED4 |
On |
Twisted pair network connection is good |
|
LED4 |
Off |
Twisted pair network connection is broken |
|
Note:LED3 and LED4 are on the Elite 16T and Elite 16 Combo only | ||