NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	32-bit MCA
Topology	Linear Bus
Wiring Type	AUI transceiver via DB-15 port RG--58A/U 50ohm coaxial
Boot ROM	Available

BOOT ROM SIZE
Size	JP1	JP2
16KB	Pins 1 & 2 Closed	Pins 1 & 2 Closed
32KB	Pins 2 & 3 Closed	Pins 1 & 2 Closed
64KB	Pins 2 & 3 Closed	Pins 2 & 3 Closed

CABLE TYPE
Type		JP4A - JP4F
»	RG--58A/U 50ohm coaxial	Closed
	AUI transceiver via DB-15 port	Open

SIGNAL QUALITY
Setting		JP8
»	SQE test disabled	Pins 2 & 3 Closed
	SQE test enabled	Pins 1 & 2 Closed
Note:Signal Quality Error (SQE) is an internal test of the collision circuitry and path.

POLARITY CORRECTION
Automatic Polarity Correction		JP9
»	Enabled	Pins 2 & 3 Closed
	Disabled	Pins 1 & 2 Closed
Note:With automatic polarity correction enabled, the card will sense if the receive wires are reversed and