Device Type	Tape Drive
Interface	SCSI-2 Fast/Wide/Differential
Format	Sony AIT (Advanced Intelligent Tape)
Sustained Transfer Rate	3MBPS (SDX-300) 6MBPS (SDX-300C)
Size	3.5 in. half height
View	Top

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Termination enabled	JP1/Pins 9 & 10	Closed
	Termination disabled	JP1/Pins 9 & 10	Open
»	Factory configured - do not alter.	SW1/1	Off
»	Factory configured - do not alter.	SW1/2	Off
»	Factory configured - do not alter.	SW1/3	Off
»	Factory configured - do not alter.	SW1/4	Off
»	Factory configured - do not alter.	SW1/5	Off
»	Factory configured - do not alter.	SW1/6	Off
»	Data compression enabled	SW1/7	On
	Data compression disabled	SW1/7	Off
»	Parity enabled	SW1/8	On
	Parity disabled	SW1/8	Off
Note: Exact orientation of SW1 is unidentified.

DRIVE SELECT ID
Drive ID	JP1/Pins 1 & 2	JP1/Pins 3 & 4	JP1/Pins 5 & 6	JP1/Pins 7 & 8
0	Open	Open	Open	Open
1	Open	Open	Open	Closed
2	Open	Open	Closed	Open
3	Open	Open	Closed	Closed
4	Open	Closed	Open	Open
5	Open	Closed	Open	Closed
6	Open	Closed	Closed	Open
7	Open	Closed	Closed	Closed
8	Closed	Open	Open	Open
9	Closed	Open	Open	Closed
10	Closed	Open	Closed	Open
11	Closed	Open	Closed	Closed
12	Closed	Closed	Open	Open
13	Closed	Closed	Open	Closed
14	Closed	Closed	Closed	Open
15	Closed	Closed	Closed	Closed

TERMINATION POWER SELECTION
Setting		JP1/Pins 11 & 12
»	TERMPWR supplied by drive	Closed
	TERMPWR supplied by SCSI interface to drive	Open

MANUFACTURERS RECOMMENDED MEDIA
Drive	Tape	Capacity Without Compression	Capacity With Compression
SDX-300	SDX-T3N A-ME* cartridge 170 meter	25.0 GB	50.0 GB
SDX-300C	SDX-T3N A-ME* cartridge 170 meter	25.0 GB	50.0 GB
Note: *Refers to the Sony Advanced Metal Evaporated (A-ME) media.

MISCELLANEOUS TECHNICAL NOTES

Exact location of terminating resistors is unidentified.