TANDBERG DATA
TDC 6122
|
Device Type |
Tape Drive |
|
Interface |
SCSI-2 |
|
Format |
QIC-5010-DC; QIC-5010-DC single-ch.; QIC-5GB; QIC-2GB; QIC-1000C; QIC-525; QIC-150; QIC-120 |
|
Sustained Transfer Rate |
Unidentified |
|
Size |
5.25 in. half height |
|
View |
Top |
|
CONNECTIONS | |
|
Function |
Label |
|
Ground connector |
CN1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
| » |
Factory configured - do not alter. |
JP1/Pins 5 & 6 |
Unidentified |
| » |
Factory configured - do not alter. |
JP1/Pins 7 & 8 |
Unidentified |
| » |
Factory configured - do not alter. |
JP1/Pins 9 & 10 |
Unidentified |
| » |
Factory configured - do not alter. |
JP1/Pins 11 & 12 |
Unidentified |
| » |
Factory configured - do not alter. |
JP1/Pins 13 & 14 |
Unidentified |
| » |
Factory configured - do not alter. |
JP1/Pins 15 & 16 |
Unidentified |
| » |
Factory configured - do not alter. |
JP1/Pins 17 & 18 |
Unidentified |
| » |
Factory configured - do not alter. (Parity enable/disable) |
JP1/Pins 19 & 20 |
Unidentified |
|
Termination enabled |
JP1/Pins 29 & 30 |
Closed | |
|
Termination disabled |
JP1/Pins 29 & 30 |
Open | |
|
Note: Pins 2 and 4 are used to connect the drive to certain test tools related to serial in/out communication. | |||
|
DRIVE SELECT ID | ||||
|
Drive ID |
JP1/Pins 21 & 22 |
JP1/Pins 23 & 24 |
JP1/Pins 25 & 26 |
JP1/Pins 27 & 28 |
|
0 |
Open |
Open |
Open |
Open |
|
1 |
Closed |
Open |
Open |
Open |
|
2 |
Open |
Closed |
Open |
Open |
|
3 |
Closed |
Closed |
Open |
Open |
|
4 |
Open |
Open |
Closed |
Open |
|
5 |
Closed |
Open |
Closed |
Open |
|
6 |
Open |
Closed |
Closed |
Open |
|
7 |
Closed |
Closed |
Closed |
Open |
|
8 |
Open |
Open |
Open |
Closed |
|
9 |
Closed |
Open |
Open |
Closed |
|
10 |
Open |
Closed |
Open |
Closed |
|
11 |
Closed |
Closed |
Open |
Closed |
|
12 |
Open |
Open |
Closed |
Closed |
|
13 |
Closed |
Open |
Closed |
Closed |
|
14 |
Open |
Closed |
Closed |
Closed |
|
15 |
Closed |
Closed |
Closed |
Closed |
|
TEST FUNCTIONS | ||||
|
Function |
Pins 21 & 22 |
Pins 23 & 24 |
Pins 25 & 26 |
Pins 27 & 28 |
|
Read/Write Selftest |
Open |
Open |
X |
X |
|
Extended Drive Selftest |
Closed |
Open |
X |
X |
|
Mainboard Selftest |
Open |
Closed |
X |
X |
|
Combined Selftest |
Closed |
Closed |
X |
X |
|
Continuous Mode |
X |
X |
X |
Closed |
|
Stop-at-Failure Mode |
X |
X |
Closed |
X |
|
Note: Pins 1 & 3 jumpered for all testing purposes. ‘X’ means don’t care. | ||||
|
TERMINATION POWER SELECTION | |
|
Setting |
JP1/Pins 31 & 32 |
|
TERMPWR supplied by drive |
Closed |
|
TERMPWR supplied by SCSI interface to drive |
Open |
|
MANUFACTURERS RECOMMENED MEDIA | ||
|
Tape |
Capacity Without Compression |
Capacity With Compression |
|
QIC-5010-DC |
13.0 GB |
Unidentified |
|
QIC-5010-DC single-ch. |
13.0 GB |
Unidentified |
|
QIC-5GB |
5.0 GB |
Unidentified |
|
QIC-2GB |
2.0 GB |
Unidentified |
|
QIC-1000C |
1.0 GB |
Unidentified |
|
QIC-525 |
525 MB |
Unidentified |
|
QIC-150 |
155 MB |
Unidentified |
|
QIC-120 |
120 MB |
Unidentified |