...because we can't all be on the bleeding edge...





WANGTEK 5525ES (VER. 2)

TECMAR

WANGTEK 5525ES (VER. 2)

Device Type

Internal Tape Drive

Interface

SCSI, SCSI-2

Format

QIC-24(read-only)

QIC-120, QIC-150, QIC-525 (write)

Sustained Transfer Rate

200 Kbps

Size

5.25 in. half height

View

Bottom

USER CONFIGURABLE SETTINGS

Setting

Label

Position

»

Parity check disabled

JP1/D

Open

 

Parity check enabled

JP1/D

Closed

»

SCSI 2 mode enable

JP2/1

Closed

 

SCSI 1 mode enabled

JP2/1

Open

»

Factory configured - do not alter

JP2/2-8

Unidentified

DRIVE SELECT ID

Drive ID

JP1/A

JP1/B

JP1/C

0

Open

Open

Open

1

Closed

Open

Open

2

Open

Closed

Open

3

Closed

Closed

Open

4

Open

Open

Closed

5

Closed

Open

Closed

6

Open

Closed

Closed

7

Closed

Closed

Closed

TERMINATION POWER SELECTION

Setting

F1

»

TERMPWR supplied by drive

1.5 ampere fuse installed

 

TERMPWR supplied by SCSI interface to drive

1.5 ampere fuse not installed

DIAGNOSTIC LED(S)

Note: Function and location of LED(s) is/are unidentified.

MISCELLANEOUS TECHNICAL NOTES

Termination is enabled or disabled via the three terminating resistors (see diagram).

MANUFACTURER’S RECOMMENDED MEDIA

Media

Mode

Capacity

DC-600A

QIC-120

125MB

DC-6150

QIC-150

150MB

DC-6250

QIC-150

250MB

DC-6320

QIC-525

320MB

DC-6525

QIC-525

320MB