...because we can't all be on the bleeding edge...





WANGTEK 5150ES (33678-XXX VER.2)

TECMAR

WANGTEK 5150ES (33678-XXX VER.2)

Device Type

Internal Tape Drive

Interface

SCSI

Format

QIC-120, QIC-150 (write)

QIC-24, QIC-120, QIC-150 (read)

Sustained Transfer Rate

1800KBPS

Size

5.25 in. half height

View

Bottom

CONNECTIONS

Function

Label

Ground connector

CN1

USER CONFIGURABLE SETTINGS

Setting

Label

Position

Ground connector enabled

E2

Closed

 

Ground connector disabled

E2

Open

Factory configured - do not alter

E5

Closed

Factory configured - do not alter

E20/0

Open

Factory configured - do not alter

E20/1

Open

Factory configured - do not alter

E20/2

Open

Factory configured - do not alter (Diagnostic test connector)

J32

Open

DRIVE SELECT ID

Drive ID

J10/A

J10/B

J10/C

0

Open

Open

Open

1

Closed

Open

Open

2

Open

Closed

Open

3

Closed

Closed

Open

4

Open

Open

Closed

5

Closed

Open

Closed

6

Open

Closed

Closed

7

Closed

Closed

Closed

Note: The function of jumper J10/D is unidentified. It is factory configured and should not be altered.

TERMINATION POWER SELECTION

Setting

E1

TERMPWR supplied by drive

Closed

 

TERMPWR supplied by SCSI interface to drive

Open

MANUFACTURERS RECOMMENDED MEDIA

Tape

Capacity

DC 600A

125 MB (in QIC-120 mode)

DC 6150

150 MB (in QIC-150 mode)

DC 6250

250 MB (in QIC-150 mode)

DIAGNOSTIC LED(S)

Note: Function and location of LED(s) is/are unidentified.

MISCELLANEOUS TECHNICAL NOTES

Termination is enabled or disabled via the three terminating resistors (see diagram).