...because we can't all be on the bleeding edge...
OCEAN INFORMATION SYSTEMS, INC.
CDR 688
|
Device Type |
CD-ROM |
|
Interface |
ATAPI |
|
Spin Rate |
8x |
|
Formats Supported |
Unidentified |
|
CONNECTIONS | |
|
Function |
Label |
|
Audio line out |
CN1 |
|
ATAPI MASTER/SLAVE | |||
|
Setting |
JP1/1 |
JP1/2 |
JP1/3 |
|
Single drive only |
Closed |
Open |
Open |
|
Master in two drive system |
Closed |
Open |
Open |
|
Slave (1) in two drive system |
Open |
Closed |
Open |
|
Slave (2) in two drive system |
Open |
Open |
Open |
|
Note: JP1/3 sets the Master/Slave determined by Cable Select but the setting is not used. ‘Single drive’ refers to the sole drive connected to an IDE interface (there may be up to two on a given system). Master & Slave refer to two drives connected to an interface. | |||