...because we can't all be on the bleeding edge...





RCD 5040 (EXTERNAL)

PINNACLE MICRO, INC.

RCD 5040 (EXTERNAL)

Device Type

Recordable CD

Interface

SCSI-1

Spin Rate - Read

4x

Spin Rate - Write

2x

Formats Supported

Unidentified

View

Top

CONNECTIONS

Function

Label

Function

Label

Audio out - right channel

CN1

Chassis ground

CN3

Audio out - left channel

CN2

   

DIAGNOSTIC LED(S) - NOT DIAGRAMMED

LED

Color

Status

Condition

Speed - front panel

Green

On

4x and 2x spin rate

Speed - front panel

Yellow

On

1x spin rate

Speed - front panel

N/A

Off

No disc inserted

Busy - front panel

Green

On

Reading data from disc

Busy - front panel

Yellow

On

Writing data or audio to disc

Busy - front panel

Yellow

Blinking

Playing audio

Busy - front panel

N/A

Off

Idle or no disc inserted

MISCELLANEOUS TECHNICAL NOTES

SCSI ID selection:

SW1 is for SCSI ID selection, 0 through 7. Default setting is 2. To select SCSI ID, turn off the power, press the top button to increase value and the bottom button to decrease value. The new SCSI ID will be registered when the power is turned on then off again.

Termination:

When terminating the drive, make sure the power is turned off, then plug a passive SCSI-1 terminator block to one of the SCSI-1 ports on the back panel.

Host adapter for the RCD 5040 in a PC system is Adaptec AHA-1535.