Card Type	Modem (synchronous/asynchronous)
Chip Set	ATI
Maximum Data Rate	2400bps
Maximum Fax Rate	9600bps (send only)
Data Bus	External
Fax Class	Class I
Data Modulation Protocol	Bell 103A/212A ITU-T V.22, V.22bis
Fax Modulation Protocol	ITU-T V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis

CONNECTIONS
Function	Label		Function		Label
Answer call button		ANS		Volume		R1
Line out		CN1		Speed selector button		SPEED
Line in		CN2		Power switch		SW1
RS-232/422		CN3		Sync/async mode button		SYNC
DC power		CN4		Test mode button		TEST
Data/Voice button		DATA

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Unidentified	On	Power is on
PWR	Unidentified	Off	Power is off
MR	Unidentified	On	DSR signal is high
MR	Unidentified	Off	DSR signal is low
RD	Unidentified	On	Modem is receiving data
RD	Unidentified	Off	Modem is not receiving data
CD	Unidentified	On	Carrier signal detected
CD	Unidentified	Off	Carrier signal not detected
DATA	Unidentified	On	Modem is establishing a connection
DATA	Unidentified	Off	Modem is not establishing a connection
ANS	Unidentified	On	Auto-answer enabled
ANS	Unidentified	Off	Auto-answer disabled
SPEED	Green	On	Modem operating at 2400bps
SPEED	Red	On	Modem operating at 1200bps
SPEED	N/A	Off	Modem operating at 300bps
SYNC	Unidentified	On	Modem is operating in synchronous mode
SYNC	Unidentified	Off	Modem is operating in asynchronous mode

DIAGNOSTIC LED(S) (CON’T)
LED	Color	Status	Condition
TEST	Unidentified	On	Modem is in test mode
TEST	Unidentified	Off	Modem is not in test mode
TR	Unidentified	On	DTR signal is high
TR	Unidentified	Off	DTR signal is low
SD	Unidentified	On	Modem is transmitting data
SD	Unidentified	Off	Modem is not transmitting data
BC	Unidentified	On	Error correction enabled
BC	Unidentified	Off	Error correction disabled
BC	Unidentified	Blinking	Errors detected in transmission