...because we can't all be on the bleeding edge...





SMART ONE 336FLX, SMART ONE 336FLXMAC

BEST DATA PRODUCTS, INC.

SMART ONE 336FLX, SMART ONE 336FLXMAC

Card Type

Modem (asynchronous)

Chipset

Unidentified

I/O Options

None

Maximum Data Rate

33.6Kbps

Maximum Fax Rate

14.4Kbps

Data Bus

Serial

Fax Class

Class I & II

Data Modulation

Bell 103A/212A

ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34

Rockwell V.FC

Fax Modulation

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, MNP10EC, V.42, V.42bis

CONNECTIONS

Function

Label

Function

Label

DC power in

CN1

Line out

CN4

RS-232/422 port

CN2

Power switch

SW1

Line in

CN3

   

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

PWR

Unidentified

On

Power is on

PWR

Unidentified

Off

Power is off

AA

Unidentified

On

Auto-answer enabled

AA

Unidentified

Off

Auto-answer disabled

CD

Unidentified

On

Carrier signal detected

CD

Unidentified

Off

Carrier signal not detected

RD

Unidentified

On

Modem is receiving data

RD

Unidentified

Off

Modem is not receiving data

SD

Unidentified

On

Modem is transmitting data

SD

Unidentified

Off

Modem is not transmitting data

TR

Unidentified

On

DTR signal is high

TR

Unidentified

Off

DTR signal is low

RI

Unidentified

On

Phone is ringing

RI

Unidentified

Off

Phone is not ringing

OH

Unidentified

On

Modem is off-hook

OH

Unidentified

Off

Modem is on-hook

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z

Extended AT Commands

\A, \B, \G, \K, \N

%C, %E, %L, %Q

Special AT Commands

#CID, :E, *H, -K, -Q, @M, +MS

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25, S26

S28, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95

Note: See MHI documentation for complete information.

UNIDENTIFIED COMMANDS

Command

Default

S37

0

S201

Unidentified

Proprietary AT Command Set

DISPLAY INFORMATION

Type:

Immediate

Format:

AT [cmds] In [cmds]

Description:

Displays information requested about the modem.

Command

Function

I0

Displays product identification code.

I1

Displays ROM checksum.

I2

Tests and reports ROM checksum.

I3

Displays firmware model, revision, and interface.

I4

Displays modem model number.

I5

Displays country code.

I6

Displays data pump model and revision.

I7

Displays the DAA code.

See BEST DATA PRODUCTS, INC. SMART ONE 2834F for a full command summary.