...because we can't all be on the bleeding edge...





DATALINK 33.6

ACTIONTEC ELECTRONICS, INC.

DATALINK 33.6

Card Type

Fax, Modem (asynchronous)

Chip Set

Unidentified

Maximum Data Rate

33.6Kbps

Maximum Fax Rate

14.4Kbps

Data Bus

PCMCIA Type II

Fax Class

Class I & II

Data Modulation Protocol

Bell 103/212A

ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34

Fax Modulation Protocol

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

53793

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, E, H, V, W, Z

&D, &F, &W

S Registers

S0, S6, S7, S8

Note: Please see MHI Help file for full command documentation.

Proprietary AT Command Set

DIAL

Type:

Immediate

Format:

AT [cmds] D<#> [cmds]

Description:

Dials telephone number according to any modifiers included in the string

Note:

Any combination of modifiers can be used to produce the desired dial functions in sequence.

Modifier

Function

T

Tone dialing enabled

P

Pulse dialing enabled

,

Dialing paused for amount of time specified in S8 register

W

Dialing resumed following dial tone detection

SPEAKER VOLUME

Type:

Configuration

Format:

AT [cmds] Ln [cmds]

Description:

Controls speaker volume

Command

Function

L0

Speaker volume disabled

í L2

Speaker volume enabled

SPEAKER MODE

Type:

Configuration

Format:

AT [cmds] Mn [cmds]

Description:

Selects various speaker options

Command

Function

M0

Speaker disabled

í M1

Speaker enabled until carrier signal detected, off for transmission

M2

Speaker enabled

DATA CARRIER DETECT (DCD)

Type:

Configuration

Format:

AT [cmds] &Cn [cmds]

Description:

Selects whether the DCD option is enabled or disabled

Command

Function

&C1

DCD enabled after carrier signal detected

MISCELLANEOUS TECHNICAL NOTES

The PCMCIA fax/modem requires an analog RJ-11 telephone line. A PBX or digital phone line may damage the PCMCIA fax/modem or telephone equipment.