...because we can't all be on the bleeding edge...





DATALINK 56K

ACTIONTEC ELECTRONICS, INC.

DATALINK 56K

Card Type

Modem, Fax

Chip Set

Unidentified

Maximum Modem Rate

56Kbps

Maximum Fax Rate

14.4Kbps

Data Modulation Protocol

Unidentified

Fax Modulation Protocol

Unidentified

Error Correction/Compression

MNP5, V.42bis

Fax Class

Unidentifed

Data Bus

PCMCIA

54676

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, E, H, V, Z

&F, &W

 

Note: See MHI Help File for full command documentation.

PROPRIETARY AT COMMAND SET

DIAL

Type:

Immediate

Format:

AT [cmds] D<#> [cmds]

Description:

Dials telephone number according to any modifiers included in the string

Note:

Any combination of modifiers can be used to produce the desired dial functions in sequence.

Command

Function

DP

Pulse dialing enabled

DT

Tone dialing enabled/Pulse dialing disabled

D,

Dialing paused for amount of time specified in S8 register

SPEAKER VOLUME

Type:

Configuration

Format:

AT [cmds] Ln [cmds]

Description:

Controls speaker volume

Command

Function

L0

Speaker disabled

L2

Volume on

SPEAKER MODE

Type:

Configuration

Format:

AT [cmds] Mn [cmds]

Description:

Selects various speaker options

Command

Function

M0

Speaker disabled

M1

Speaker enabled until carrier signal detected

M2

Speaker enabled

EXTENDED RESULT CODES

Type:

Configuration

Format:

AT [cmds] Wn [cmds]

Description:

Reports modem progress

Command

Function

W0

Enables CONNECT result codes to report modem type and DTE speed.

W1

Enables CONNECT result codes to report DTE speed, carrier, protocol, and compression

W2

Enables CONNECT result codes to report DCE speed..

DATA CARRIER DETECT (DCD)

Type:

Configuration

Format:

AT [cmds] &Cn [cmds]

Description:

Selects whether the DCD option is enabled or disabled

Command

Function

&C1

DCD enabled after carrier signal detected

DATA TERMINAL READY (DTR)

Type:

Configuration

Format:

AT [cmds] &Dn [cmds]

Description:

Selects modem response to DTR

Command

Function

&D2

DTR enabled