Card Type	Modem (asynchronous)
Chipset	Unidentified
Maximum Data Rate	33.6Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	PCMCIA Type II
Fax Class	Class I & II
Data Modulation	Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis, V.34 AT&T V.32terbo
Fax Modulation	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, D, E, H, L, M, N, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &L, &R, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \C, \G, \J, \K, \N, \Q, \T, \V, \X

%A, %C, %G

Special AT Commands

"H, -J, "N, "O

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S22, S25, S26, S27, S30

S28, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95, S201

Note: See MHI documentation for complete information.

UNIDENTIFIED COMMANDS
Command	Default
O	N/A
S42	Read-only

DISPLAY INFORMATION
Type:	Immediate
Format:	AT [cmds] In [cmds]
Description:	Displays information requested about the modem.
Command	Function
I0	Displays product identification code.
I1	Displays ROM checksum.
I2	Displays OEM string.
I3	Displays firmware revision.
I4	Displays EEPROM type.
I5	Displays DSP chip version.
I9	Displays Flash ROM checksum.

LINE SPEED
Type:	Register
Format	AT [cmds] S37=n [cmds]
Description:	Sets the maximum allowable connect speed attempted during the handshaking process.
Command	Function
í S37=0	Speed of last connection
S37=3	Connect at 300bps.
S37=5	Connect at 1200bps.
S37=6	Connect at 2400bps.
S37=7	Connect at 4800bps.
S37=8	Connect at 7200bps.
S37=9	Connect at 9600bps.
S37=10	Connect at 12Kbps.
S37=11	Connect at 14.4Kbps.
S37=12	Connect at 16.8Kbps.
S37=13	Connect at 19.2Kbps.
S37=14	Connect at 21.6Kbps.
S37=15	Connect at 24Kbps.
S37=16	Connect at 26.4Kbps.
S37=17	Connect at 28.8Kbps.
S37=18	Connect at 31.2Kbps.
S37=19	Connect at 33.6Kbps.