Card Type	Fax, Modem (asynchronous), Network Interface Card
Chip Set	Unidentified
I/O Options	Ethernet 10BaseT connector
NIC Type	Ethernet
Network Transfer Rate	10Mbps
Maximum Modem Rate	28.8Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	PCMCIA Type II
Fax Class	Class I & II
Data Modulation Protocol	Bell 103, Bell 212A/B ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34
Fax Modulation Protocol	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis
Topology	Star
Wiring Type	Unshielded twisted pair
Boot ROM	Not available

SUPPORTED COMMAND SET

Basic AT Commands

AT, ‘Comma’, A/

A, B, C, D, E, H, M, N, O, P, Q, S, T, V, X, Y, Z

&C, &D, &F, &G, &P, &S, &T, &V, &W

Extended AT Commands

\K, \N, %E, %Q

S Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S25, S26, S29, S30, S32

S33, S37, S38

Note: See MHI Help file for full command documentation.

MODULATION SELECTION
Type:	Configuration
Format:	AT [cmds] Fn [cmds]
Description:	Controls which modulation the modem uses to connect with
Command		Function
F0		Auto-detect mode, same as ATN1

REPORT INFORMATION
Type:	Immediate
Format:	AT [cmds] In [cmds]
Description:	Displays information requested
Command	Function
I0	Reports product code

SLEEP TIMER
Type:	Register
Format	AT [cmds] S24=n [cmds]
Default:	Unidentified
Range:	0-255
Unit:	1 second
Description:	Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode.