Card Type	Telephony/Network
NIC Type	ATM
I/O Options	MVIP bus
Network Transfer Rate	Unidentified
Data Bus	32-bit PCI
Topology	Star
Wire Type	Unshielded twisted pair

CONNECTIONS
Function	Label	Function	Label
Line 1 out	CN1	ATM connector	CN3
Line 2 out	CN2	DC power in	JP3
Note:This card requires an external DC power supply to be connected to JP3. For more information, contact the manufacturer.

USER CONFIGURABLE SETTINGS
Setting		Label	Position
	Line 1 audio output fed through to audio input	JP4	Closed
	Line 1 audio output not fed through to audio input	JP4	Open
	Line 2 audio output fed through to audio input	JP5	Closed
	Line 2 audio output not fed through to audio input	JP5	Open
»	Factory configured - do not alter	JP6	Pins 1 & 2 closed
»	Factory configured - do not alter	JP10	Pins 2 & 3 closed

LINE 1 CONFIGURATION
Setting	JP1	JP7
Subscriber Line Interface Circuit	Pins 5 & 6, 7 & 8 closed	Pins 3 & 5, 4 & 6 closed
Telephone handset	Pins 1 & 2, 3 & 5, 7 & 9, 11 & 12 closed	Pins 1 & 3, 2 & 4 closed

LINE 2 CONFIGURATION
Setting	JP2	JP8
Central Office Interface Circuit	Pins 5 & 6, 7 & 8 closed	Pins 3 & 5, 4 & 6 closed
Telephone handset	Pins 1 & 2, 3 & 5, 7 & 9, 11 & 12 closed	Pins 1 & 3, 2 & 4 closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	ATM is transmitting a cell
LED1	Green	Off	ATM is not transmitting a cell
LED2	Green	On	ATM is receiving a cell
LED2	Green	Off	ATM is not receiving a cell
LED3	Red	On	On-board CPU halted
LED3	Red	Off	On-board CPU operation normal
Note:The exact location of LED3 is unidentified. However, it is in the vicinity of its location on the diagram.