...because we can't all be on the bleeding edge...





6520/6560 MPROUTER T1/E1 DUAL PORT CARD

MOTOROLA, INC.

6520/6560 MPROUTER T1/E1 DUAL PORT CARD

Card Type

T1 or E1 CSU/DSU

Chip Set

Unidentified

I/O Options

MVIP bus

Transfer Rate

1.544Mbps x 2 for T1, 2.048Mbps x 2 for E1

Data Bus

16-bit ISA

CONNECTIONS

Function

Label

Function

Label

Line 1

CN1

Diagnostic port (not used)

CN3

Line 2

CN2

MVIP bus

CN4

USER CONFIGURABLE SETTINGS

Setting

Label

Position

»

Factory configured - do not alter

SW1/1

On

»

Factory configured - do not alter

SW1/2

On

»

Factory configured - do not alter

SW1/3

On

»

Factory configured - do not alter

SW1/4

On

»

Factory configured - do not alter

SW1/5

On

»

Factory configured - do not alter

SW1/6

Off

»

Factory configured - do not alter

SW1/7

Off

»

Factory configured - do not alter

SW1/8

Off

»

Factory configured - do not alter

SW1/9

Off

»

Factory configured - do not alter

SW1/10

On

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

LED1

Yellow

On

Carrier signal not detected on line 1

LED1

Yellow

Off

Carrier signal detected on line 1

LED2

Yellow

On

Carrier signal not detected on line 2

LED2

Yellow

Off

Carrier signal detected on line 2

LED3

Green

On

Card is operating normally

LED3

Green

Off

Card has failed

LED4

Yellow

On

Card has failed

LED4

Yellow

Off

Card is operating normally

MISCELLANEOUS TECHNICAL NOTE

This card is designed for use in Motorola’s 6520/6560 MPRouter system and will not function in another system. See documents M3596 and M3597 for more information.