...because we can't all be on the bleeding edge...





ALLIANCE V.32/ALLIANCE V.32M

PENRIL DATABILITY NETWORKS

ALLIANCE V.32/ALLIANCE V.32M

Modem Type

Data (synchronous/asynchronous)/Fax

Maximum Data Rate

9600bps

Maximum Fax Rate

14.4Kbps

Data Bus

External

Fax Class

Class I & II

Data Modulation Protocol

Bell 103A/212A

ITU-T V.21, V.22, V.22bis, V.26, V.26bis, V.27bis, V.27ter

V.29, V.32

Fax Modulation Protocol

ITU-T V.17, V.27ter, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

 

CONNECTIONS

Purpose

Location

Purpose

Location

LCD display

LCD

Line in

CN1

Left arrow button

BT1

Leased line out

CN2

1 button

BT2

Leased line out

CN3

2 button

BT3

Switched line out

CN4

3 button

BT4

DC power

CN5

Right arrow button

BT5

Diagnostic connector

CN6

ENTER button

BT6

RS-232/422

CN7

A/A1 - MI/MIC CONTROL

Control Type

JP5

JP6

A/A1 control.

Pin 1 & 2 closed.

Pin 1 & 2 closed.

MI/MIC control.

Pin 2 & 3 closed.

Pin 2 & 3 closed.

DTE CONNECTOR - PIN 25

Function

JP7

Analog loopback (Input).

Pin 1 & 2 closed.

Test Mode Indicator (Output).

Pin 2 & 3 closed.

FRAME/SIGNAL GROUND

Ground Type

JP1

Frame and signal ground connected.

Pin 1 & 2 closed.

Frame and signal ground not connected.

Pin 2 & 3 closed.

FACTORY CONFIGURED SETTINGS - DO NOT ALTER

Jumper

Setting

JP8

Pin 2 & 3 closed.

JP9

Pin 2 & 3 closed.

JP10

Pin 2 & 3 closed.

JP11

Pin 2 & 3 closed.

POWER

Power Source

JP2

JP3

JP4

AC power.

Pin 1 & 2 closed.

Pin 1 & 2 closed.

Pin 1 & 2 closed.

DC power.

Pin 2 & 3 closed.

Pin 2 & 3 closed.

Pin 2 & 3 closed.

Proprietary AT Command Set

See document V1409 for a full command summary.