Card Type	Modem (synchronous/asynchronous)
Processor	Motorola 68000
Processor Speed	Unidentified
Chipset	Unidentified
Maximum Data Rate	18Kbps
Data Bus	Serial
Data Modulation	Bell 103A/212A ITU-T V.22, V.22bis Telebit PEP
Error Correction/Compression	MNP3

CONNECTIONS
Function	Label		Function		Label
DC power		CN1		Talk/Data switch		SW1
RS-232/422		CN2		Configuration A/B switch		SW2
Line in		CN3		Power switch		SW3
Line out		CN4
Note: The exact locations of SW1 and SW2 are unidentified

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í 1MB ROMs installed	E1	Pins 1 & 2 closed
512KB ROMs installed	E1	Pins 2 & 3 closed
Note: When installing 512KB ROMs, the chips should be installed in the holes of the sockets furthest from the CPU.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
FST	Unidentified	On	Modem is using PEP protocol
FST	Unidentified	Off	Modem is not using PEP protocol
SLW	Unidentified	On	Modem is using Bell 103, Bell 212, V.22, or V.22bis protocol
SLW	Unidentified	Off	Modem is not using Bell 103, Bell 212, V.22, or V.22bis protocol
OH	Unidentified	On	Modem is off-hook
OH	Unidentified	Off	Modem is on-hook
RD	Unidentified	On	Modem is receiving data
RD	Unidentified	Off	Modem is not receiving data
SD	Unidentified	On	Modem is transmitting data
SD	Unidentified	Off	Modem is not transmitting data
CTS	Unidentified	On	CTS signal is high
CTS	Unidentified	Off	CTS signal is low
DTR	Unidentified	On	DTR signal is high
DTR	Unidentified	Off	DTR signal is low
MR	Unidentified	On	Power is on
MR	Unidentified	Off	Power is off