Card Type	Fax, Modem (asynchronous)
Chip Set	Unidentified
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	External
Fax Class	Class I & II
Data Modulation Protocol	Bell 103/212A ITU-T V.21, V.22A/B, V.22bis, V.23, V.32, V.32bis
Fax Modulation Protocol	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis

CONNECTIONS
Function	Label		Function		Label
Line in		CN1		DC power		CN4
Line out		CN2		Power switch		SW1
RS-232/422		CN3

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
MSG	Red	On	Used by software applications. Faxes are waiting
MSG	Red	Off	Used by software applications. Faxes are not waiting
FAX	Red	On	Modem is connected in FAX mode
FAX	Red	Off	Modem is not connected in FAX mode
14.4	Red	On	Modem connected at 14.4Kbps (V.32bis, or FAX mode)
14.4	Red	Off	Modem not connected at 14.4Kbps (V.32bis, or FAX mode)
V32	Red	On	Modem connected at 9600bps or 4800bps or faster
V32	Red	Off	Modem not connected at 9600bps or 4800bps or faster
V42	Red	On	Error correction (V.42) enabled
V42	Red	Off	Error correction (V.42) disabled
DC	Red	On	Data compression (V.42bis or MNP5) enabled
DC	Red	Off	Data compression (V.42bis or MNP5) disabled
EC	Red	On	Error correction enabled using V.42 or MNP4 to send data
EC	Red	Off	Error correction disabled
FC	Red	On	Flow control enabled and data buffers not full
FC	Red	Off	Flow control disabled or data buffers full
AA	Red	On	Auto-answer enabled
AA	Red	Off	Auto-answer disabled
AA	Red	Blinking	Phone is ringing
CD	Red	On	Carrier signal detected
CD	Red	Off	Carrier signal not detected
OH	Red	On	Modem is off-hook
OH	Red	Off	Modem is on-hook
RD	Red	On	Modem is receiving data
RD	Red	Off	Modem is not receiving data
SD	Red	On	Modem is transmitting data
SD	Red	Off	Modem is not transmitting data
TR	Red	On	DTR signal is high
TR	Red	Off	DTR signal is low
MR	Red	On	Power is on
MR	Red	Off	Power is off