Card Type	Modem, Fax
Chip Set	PCtel
I/O Options	Line in (RJ-11), line out (RJ-11)
Maximum Modem Rate	33.6Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation Protocol	Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34, V.34bis
Fax Modulation Protocol	ITU-T V.17, V.21CHANNEL2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis
Fax Class	Class I
Data Bus	16-bit ISA
Card Size	Half-length, half-height card

CONNECTIONS
Function	Label		Function		Label
Line out		CN1		Line in		CN2

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, B, D, E, H, I, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &P, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \G, \K, \L, \N

%C, %E, %L

S Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30, S32, S33, S37, S38, S86,

S91

Note: See MHI Help File for full command documentation.

TRELLIS CODING CONFIGURATION
Type:	Configuration
Format:	AT [cmds] &Un [cmds]
Description:	Controls the Trellis coding settings
Command	Function
í &U1	Trellis coding disabled
&U1	Trellis coding enabled

CPU USAGE SETTINGS
Type:	Configuration
Format:	AT [cmds] %Nn [cmds]
Description:	Selects the total usage of the CPU while operating the modem. Default=%N7

V.34 DATA RATE
Type:	Register
Format	AT [cmds] S34=n [cmds]
Default:	11
Range:	Unidentified
Unit:	bits
Description:	Determines the data rate while using V.34 compression

V.34 SYMBOL RATE
Type:	Register
Format	AT [cmds] S34=n [cmds]
Default:	0
Description:	Determines the baud rate while using V.34 compression