|
VGA-V (52100T)
AUVA COMPUTER, INC.
VGA-V (52100T)
|
Card Type
|
Video card
|
|
Video Chip Set
|
Tseng Labs
|
|
Highest Resolution Supported
|
1024 x 768
|
|
Maximum Video Memory
|
1MB DRAM
|
|
Data Bus
|
8/16-bit ISA
|
|
Video Types Supported
|
Monochrome, CGA, EGA, VGA
|
|
CONNECTIONS
|
|
Function
|
Label
|
Function
|
Label
|
|
Feature connector
|
CN1
|
15-pin analog video port
|
CN2
|
|
USER CONFIGURABLE SETTINGS
|
|
Function
|
Label
|
Position
|
| »
|
IRQ 2/9 disabled
|
J1
|
Pins 2 & 3 closed
|
|
|
IRQ 2/9 enabled
|
J1
|
Pins 1 & 2 closed
|
| »
|
Scan rate >48.7KHz (non-interlaced mode)
|
SW3
|
Open
|
|
|
Scan rate <48.7KHz (interlaced mode)
|
SW3
|
Closed
|
| »
|
Autodetect enabled
|
SW4
|
Open
|
|
|
Autodetect disabled
|
SW4
|
Closed
|
|
DRAM CONFIGURATION
|
|
Note: 256KB, 512 KB, or 1MB DRAM configurations available. The orientation of the banks and size of
chips used are unidentified.
|
|
MONITOR DETECTION CONTROL
|
|
Function
|
J6
|
| »
|
IBM standard monitor pinout
|
Pins 1 & 2 closed
|
|
|
Non-standard color pinout
|
Open
|
|
|
Non-standard monochrome pinout
|
Pins 2 & 3 closed
|
|
Note: If your VGA monitor boots up in monochrome mode remove the jumper, and if your VGA monochrome monitor does not display correctly place the jumper over pins 2 & 3.
|
|