Card Type	Parallel/Video card
Video Chip Set	Unidentified
Maximum Video Memory	Unidentified
Video Types Supported	Monochrome, CGA, EGA
Highest Resolution Supported	80 x 25
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
15-pin analog video port	J1	25-pin paralled port	J2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	W1	Pins 2 & 3 closed
	Non-maskable interrupt selected	W2	Pins 2 & 3 closed
	Interrupt selected	W2	Pins 1 & 2 closed
»	Factory configured - do not alter	W7	Pins 2 & 3 closed
»	Factory configured - do not alter	W8	Open
»	Factory configured - do not alter	W11	Pins 2 & 3 closed
»	Factory configured - do not alter	W12	Pins 2 & 3 closed
»	Factory configured - do not alter	W13	Closed
»	Hercules emulation disabled	SW1/5	Open
	Hercules emulation enabled	SW1/5	Closed
»	Factory configured - do not alter	SW1/6	Open

XT SLOT 8 INSTALLATION
Setting	W10
Card installed in XT-slot 8	Closed
Card installed in other slot	Open

PARALLEL PORT ADDRESS SELECTION
Setting		W4	W5
	LPT1 (378h)	Pins 2 & 3 closed	Pins 1 & 2 closed
	LPT2 (278h)	Pins 1 & 2 closed	Pins 1 & 2 closed
»	LPT3 (3BCh)	Pins 2 & 3 closed	Pins 2 & 3 closed
	Disabled	Pins 1 & 2 closed	Pins 2 & 3 closed

PARALLEL PORT INTERRUPT SELECTION
IRQ	W6
IRQ7	Pins 2 & 3 closed
IRQ5	Pins 1 & 2 closed

INTERRUPT SELECTION
IRQ	W9/A	W9/B	W9/C	W9/D	W9/E	W9/F	W9/G
2	Open	Closed	Open	Open	Open	Open	Open
3	Open	Open	Closed	Open	Open	Open	Open
4	Open	Open	Open	Closed	Open	Open	Open
5	Open	Open	Open	Open	Closed	Open	Open
6	Open	Open	Open	Open	Open	Closed	Open
7	Open	Open	Open	Open	Open	Open	Closed
Disabled	Closed	Open	Open	Open	Open	Open	Open

DISPLAY CONFIGURATION
Monitor	Mode	SW1/1	SW1/2	SW1/3	SW1/4	SW1/7	SW1/8
EGA	EGA 80 x 25	Off	On	On	Off	On	On
Multi-Sync	EGA 80 x 25	Off	On	On	Off	Off	On
EGA	CGA 80 x 25	On	On	On	Off	On	On
CGA	CGA 80 x 25	Off	Off	Off	On	On	Off
CGA	CGA 40 x 25	On	Off	Off	On	On	Off
Monochrome	Monochrome	Off	Off	On	Off	Off	Off