Card Type	Video card
Video Processor	6845
Maximum Onboard Memory	256KB DRAM
Data Bus	8-bit ISA
Video Types Supported	Plantronics, EGA
Highest Resolution Supported	720 x 350

CONNECTIONS
Function	Label	Function	Label
Not used	J1	9-pin video out connector	J3
Not used	J2	Not used	J4

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	P1	Unidentified
»	EGA mode base I/O address set to 3D0h	P3	Pins 1 & 2 closed
	EGA mode base I/O address set to 2D0h	P3	Pins 2 & 3 closed
»	Card will use EGA mode by default	SW1/5	Off
	Card will use CGA or monochrome mode by default	SW1/5	On
Note:SW1/5 must always be turned off for Tandy SX and TX model mainboards.

MONITOR TYPE SELECTION
Setting	P2	SW1/1	SW1/2	SW1/3	SW1/4
Monochrome	Pins 2 & 3	Off	Off	On	Off
CGA	Pins 2 & 3	Off	Off	Off	On
EGA	Pins 1 & 2	Off	On	On	Off
Note:Pins designated are in the closed position.