Card Type	Video card
Video Chipset	Video Seven
Maximum Video Memory	512KB DRAM
I/O Options	EGA feature connector, light pen port, RF adapter port
Data Bus	8-bit ISA
Video Types Supported	XVGA
Highest Resolution Supported	800 x 600

CONNECTIONS
Function	Label	Function	Label
15-pin analog VGA port	J1	Light pen port	J6
9-pin digital EGA port	J2	RF adapter port	J8
EGA feature connector	J4

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	EGA mode base I/O address set to 3D0h	P1	Pins 1 & 2 closed
	EGA mode base I/O address set to 2D0h (reserved)	P1	Pins 2 & 3 closed
»	Factory configured - do not alter	P2	Pins 1 & 2 closed
»	Card is not installed in XT slot 8	P3	Pins 2 & 3 closed
	Card is installed in XT slot 8	P3	Pins 1 & 2 closed
»	On-board oscillator enabled	P4	Pins 2 & 3 closed
	Oscillator connected to feature adapter enabled	P4	Pins 1 & 2 closed
»	Factory configured - do not alter	P5	Pins 2 & 3 closed
»	Factory configured - do not alter	P8	Pins 2 & 3 closed
»	Card is primary display	SW1/4	Off
	Card is secondary display	SW1/4	On
»	Card auto-detects software video mode	SW1/5	On
	Card is in standard VGA mode	SW1/5	Off
»	Card is in VGA mode on boot	SW1/6	On
	Card is in CGA or monochrome mode on boot	SW1/6	Off
Note:The two jumpers labeled P2/P8 indicate the locations of jumpers P2 and P8. Information of which jumper is in which location is unidentified.

MONITOR TYPE SELECTION
Setting		SW1/1	SW1/2	SW1/3
»	Auto-detect monitor type	Off	Off	Off
	Nanao 8060/9070, NEC MultiSync, Princeton UltraSync	On	Off	Off
	All Mitsubishi, Sony MultiScan, all Taxan, all Thomson	Off	On	Off
	NEC Multisync Plus and XL	On	On	Off
	IBM PS/2 Analog Display	Off	Off	On
	IBM Color Display	On	Off	On
	IBM Enhanced Color Display	Off	On	On
	IBM Monochrome Display	On	On	On