TUCoPS :: Physical Security :: lp-m_n~1.htm

(Accessory file for The Hackers Guide to Lockpicking)
Lock-Picking: Mushroom and Spool Pin Tumbler Locks

MUSHROOM AND SPOOL PIN TUMBLER LOCKS



High-security pin tumbler locks may contain specially made pins to make picking them more challenging. The pins are machined so as to make picking them quite dif- ficult. When picking these locks, the pins give the impres- sion that they have broken, when in fact they could be a long way from breaking. You can tell whether or not you are picking a pin tumbler lock that has these pins by the fact that the pins seem to align so easily with a louder than normal click. The cylinder seems eager to open but to no avail.

The picking procedure relies on a well-yielding tension wrench. The tension wrench has to be lightly spring-loaded so that the pins can bypass their false breaking points. You also have to "rake" (seesaw in and out) the pins with your pick. The feather-touch tension wrench is ideal for the job. Use light pressure with it, and it will let you in.

(Note: A feather-touch tension wrench is not necessarily required. A normal tension wrench will work fine with an extremely light tension on it. The weight of just your index finger alone should be enough in most cases.)

The mushroom and spool pins are used in locks for high-security purposes such as bank doors. The American Lock Company uses them in some of their padlocks.


Main Page

TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2024 AOH