TUCoPS :: Radio :: ic32at13.txt

Modification for Icom 32at

IC32AT.13 
   Icom Service Bulletin #13889-005

   The IC-32AT has the capability of being used as a cross-band repeater.
   This function is not enabled as the unit is shipped from the factory.

   To enable this function perform the following steps:

   1- Cut D912 on LOGIC UNIT. (see above figure)

   2- Push and hold the (FUNCTION) switch.

   3- Push the (C) key.

   4- Push the (6) key.

   5- Push the (D) key.

   6- Release the (FUNCTION) switch.

   To cancel "MINI REPEATER" perform the following steps:

   1- Push and hold the (FUNCTION) switch.

   2- Push the (D) key.

   3- Push the (C) key.

   4- Release the (FUNCTION) switch.

TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2024 AOH