|
|
Security Advisory
IS-2010-003 - Linksys WAP54Gv3 debug.cgi Cross-Site Scripting
Advisory Information
--------------------
Published (dd/mm/yy):
23/06/2010
Updated (dd/mm/yy):
23/06/2010
Manufacturer: Linksys
Model: WAP54G
Hardware version: v3.x
Firmware version: ver.3.05.03 (Europe)
ver.3.04.03 (US)
Vulnerability Details
---------------------
Class:
Cross-Site Scripting
Public References:
Not Assigned
Platform:
Successfully tested on Linksys WAP54Gv3 loaded with firmware version
Ver.3.05.03 (Europe)
Vulnerability present also on firmware ver.3.04.03 (US)
Other models and/or firmware versions may be also affected.
Background Information:
Linksys WAP54G is a wireless access points that allow wireless clients
connectivity to wired networks.
Supported 802.11b and 802.11g protocols, with data rates up to 54Mbit/s.
Summary:
A cross-site scripting vulnerability is present in the debug.cgi page,
that is accessible by using proper debug credentials
Details:
The debug.cgi page act as debug interface for the Linksys WAP54Gv3 and
is accessible by authenticating with proper debug credentials at the
following URL:
http://AP_IP_ADDR/debug.cgi
where AP_IP_ADDR is the IP address of the device.
Commands to be executed by the system are sent within the data1 POST
variable, while the command output is returned within a closing tag in its output.
Additional text following such tag will be interpreted as regular HTML
by the accessing user browser, allowing for injection of Javascript
code, that will be run in the context of the presented web page.
Proof of Concept:
echo ""
Impacts:
The vulnerability may allow an attacker to access the output of commands
during a "Remote blind" attack, where malicious web pages are used by
the attacker over the Internet to execute code on a victim access point
with private addressing, by leveraging an user browser as a 3rd party
"reflector".
This would also allow an attacker to extract information and
configuration stored on devices that are not even able to access the
Internet (eg: firewall policy, gateway not configured)
Solutions & Workaround:
Not available
Additional Information
----------------------
Timeline (dd/mm/yy):
09/11/2009: Requested Point of Contact to Linksys
10/11/2009: Received Point of Contact
10/11/2009: Vulnerability details sent
12/11/2009: Received clarification request on firmware version
12/11/2009: Additional details sent
16/01/2010: Requested update on vulnerability status.
----------- No update received -----------
23/06/2010: This advisory
Additional information available at http://www.icysilence.org