NEC P400 and 600

NOTES:  These are quad NAM handheld units.
        The ESN prefix is 135 decimal & 87 hex.
        An NEC programing adaptor and converter cable must be used to
        program these units.
        NEC: 1-800-421-2141

NAM programing:

1.  With the power off connect the NEC programing adaptor and cable.

2.  Turn power on.

3.  Press RCL # 0 1 to enter test mode.

3.  Press RCL # 7 1 to enter programing mode.

4.  Press # to increment and store each step.

5.  At any time press and hold CLR to return to test mode, press RCL # 0 2
    to complete and exit programing.



PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       10 DIGITS           Phone No.      MIN (AREA CODE & TEL#)
02       4 DIGITS            Lock Code      LOCK CODE
03       00000 - 32767       Home Area      SYSTEM ID
04       2 DIGITS            G.I. Mark      GROUP ID (10 IN USA)
05       0333 OR 0334        First P-CH     INITIAL PAGING CHANNEL
06       0 OR 1              Sys Select     PREFERRED SYSTEM (0=B, 1=A)
07       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
08       0 OR 1              MIM Mark       MIN MARK
09       0 OR 1              Local Use      LOCAL USE MARK
10       3 DIGITS            EMG No         EMERGENCY NUMBER (911)

LOCK & UNLOCK: F # four digit code.

SYSTEM SELECT:
P400: F 5 then 5 to scroll, CLR to store.
P600: F 5 4 then RCL to scroll, CLR to store.