NOVATEL PTR800, 825

NOTES:  These are quad NAM handheld units
        The ESN prefix is 142 decimal & 8E hex.
        Novatel: 1-800-527-2885

NAM PROGRAMING:

1.  Turn power on.

2.  Initialize NAM MIN lock out counter by entering:
    FCN FCN * 6 4 6 2 2 5 7

3.  PTR 800 enter: FCN FCN * 6 2 6 7 7 6 *

4.  PTR 825 enter: FCN FCN * 6 9 7 2 0 1 *

5.  The # key stores each entry.

6.  The volume up key increments the step number.

7.  At any time press FCN end to complete and exit programing mode.

PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  SOFTWARE REVISION
02       1 TO 4              NAM            SELECT NAM 1 - 4
03       00000 - 32767       SIDH           SYSTEM ID
04       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
05       333                 IDCCA          "A" SYS INITIAL PAGING CHANNEL
06       334                 IDCCB          "B" SYS INITIAL PAGING CHANNEL
07       0333 OR 0334        IPCH           INITIAL PAGING CHANNEL
08       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
09       2 DIGITS            GIM            GROUP ID (10 IN USA)
10       3 DIGITS            LOCK A         FULL ACCESS LOCK CODE
11       3 DIGITS            LOCK B         RESTRICTED LOCK CODE
12       0 OR 1              LC             LOCAL USE MARK
13       0 OR 1              EX             EXTENDED ADDRESS MARK
14       0 OR 1              PS             PREFERRED SYSTEM
15       0 ONLY              NSC            NON STANDARD CONTROL
16       0 OR 1              EE             END TO END (DTMF) DIALING
17       0 OR 1              REP            REPERTORY (SPEED) DIALING
18       0 OR 1              HA             HORN ALERT
19       0 OR 1              HF             HANDS FREE
20       0 OR 1              IRI            ROAM INHIBIT
21       0 OR 1              F1             LOCK A ENABLE
22       0 OR 1              F2             LOCK B ENABLE
23       0 OR 1              F3             ON LINE DIAGNOSTICS (FCN 4
                                            WILL DISPLAY CHANNEL & RSSI)
24       0 ONLY              F4             NOT USED
25       0 ONLY              F5             NOT USED
26       0 ONLY              F6             NOT USED
27       0 ONLY              F7             NOT USED

LOCK: F #.  UNLOCK: Enter three digit code.

SYSTEM SELECT: F 5 then one of the following: 1 = Pref/non pref, 2 = Non
pref/pref, 3 = A only, 4 = B only, 5 = Home only.