HOW TO PICK MASTER LOCKS

    Have you ever tried to impress your friends by picking one of those Master

combination locks and failed? Well then read on. The Master lock company has

made this kind of lock with a protection scheme. If you pull the handle of it

hard, the knob won't turn. That was their biggest mistake...... Ok, now on to

it.



    1st number.  Get out any of the Master locks so you know what's going on.

1: The handle part (the part that springs open when you get
the combination),

pull on it, but not enough so that the knob won't move. 2: While pulling on it

turn the knob to the left until it won't move any more. Then add 5 to this

number. Congradulations, you now have the 1st number.



    2nd number. (a lot tougher) Ok, spin the dial around a couple of times,

then go to the 1st number you got, then turn it to the right, bypassing the 1st

number once. WHEN you have bypassed. Start pulling the handle and turning it.

It will eventually fall into the groove and
 lock. While in the groove pull on

it and turn the knob. If it is loose go to the next groove; if it's stiff you

got the second number.



    3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers,

then after the 2nd, go to the right and at all the numbers pull on it. The lock

will eventually open if you did it right. If can't do it the first time, be

patient, it takes time.