|
IC24AT.10 I received the following mods for 24AT out-of-band from a very reliable source (although they don't specify RX only or RX/TX), for 75-195 MHz, 200-490 MHz, and 740-960 MHz. Rumor has it (unconfirmed) that the unit even switches to AM in the air band! 1. Remove diode D8 [see figure below] 2. Attach diode D7 [I believe this is already equipped] 3. Attach diode D12 4. Remove diode D13 5. Simultaneously hold "LIGHT", "B", and "#" keys and turn the power on. Release all keys after the display goes out (checks all LCD segments). [This is supposed to enable the out-of-band frequencies above] 6. Simultaneously hold "LIGHT" and "2" keys and turn the power on. This enables the 10 MHz frequency digit entry. 7. Simultaneously hold "LIGHT" and "3" keys and turn the power on. This enables the 100 MHz frequency digit entry. __________________ | | | | | | | CPU | | | | | | | |________________| o o o D7 lower left pin is [D7] [D8] anode of one diode, o o o lower right is cathode of the other. Top pin o o is common [D12] o D12 upper pins are cath- odes of diodes, lower is common anode. __I_ __I_ See text | | | | D13 |__| | | D? |/\| | | | | | | |__| |__| I I WARNING: I have NOT tried the hardware mods and cannot vouch for them, so proceed at your own risk! CONTINUED IN IC24AT.11