IC32AT.3

Hello everybody, new radios are getting more and more complicated, don't you
agree?
Here is a modification for the new Handheld Icom IC-32 which will make it act
as a cross band repeater!

1. First take off the battery pack.
2. Remove the 4 screws from radio's back.
3. Remove two screws above and below the PTT and take the whole thing off
   so the four microswitches are revealed.
4. Take carefully the radio apart by slightly pushing away the front cover.
5. Put the two pieces in front of you with the front part at your left and
   the back at your right. Be carefull with the ribbon joining the two
   pieces!!! Orientation is as usual with the place that the battery plugs
   down and the top of radio (i.e. where the antenna goes) up.
6. Find some pads with diodes in the lower right of the left part (front) of
   the radio below to the speaker.Take a look in the drawing below:
CONTINUED IN FILE IC32AT.10