IC32AT.4

CROSSBAND REPEATER COMMANDS
1.  Enter one VHF and one UHF frequency into each VFO. (Offsets won't
    work.)
2.  To enable crossband repeater, hold down "FUNCTION" buttom and key
    in, [C] [6] [D]. Then release "FUNCTION" button.
3.  To disable crossband repeater, wait until handheld is in receive
    only and then hold down "FUNCTION" button and key in, [D] [C].
    Then release "FUNCTION" button.
*** ONCE HANDHELD RETRANSMITS A SIGNAL FROM OPPOSITE BAND YOU  CANNOT
DISABLE CROSSBAND FUNCTION UNTILL SQUELCH CLOSES AND HANDHELD QUITS
TRANSMITTING! ***
continued in file ic32at.7