PRO34.5


16. NOTE: The keyboard lock switch is a funky little piece of plastic with a
    sliding stainless metal contactor that is just wedged inbetween the front
    case and the logic board. Remove both the switch contacts and the plastic
    switch. (best know it now or loose them in the carpet)

17. On the component side of the PC board you will see lots of nifty surface
    mounted compone]ts, a fat little barrel capacitor (used for maintaining
    the channel freqs while you change the batteries.. and make
    modifications:) near the edge of the PC board you will see a couple of
    small diodes moutned vertically. These will be labeled on the PC board as
    D10 and D11, you will also see a place for another diaode to be soldered
    in but was not installed at the factory.. this is D9.
CONTINUED IN FILE PRO34.13