******************* BIOC AGENT 003
'S TUTORIAL IN *************************
*
*
* ==========
========== *
* =HACKING T
HE HP2000= *
* ==========
========== *
*
*
***************************************
****************************************
PREFACE
-------
THE PURPOSE OF THIS TUTORIAL IS TO GIVE
POTENTIAL HACKERS USEFUL INFORMATION
ABOUT HEWLETT-PACKARD'S HP2000 SYSTEMS.
THE FOLLOWING NOTATION WILL BE USED
THROUGHOUT THIS TUTORIAL:
<CR> - CARRIAGE RETURN, RETURN, ENTER,
ETC.
^C - A CONTROL CHARACTER (CONTROL-C I
N EXAMPLE)
CAPITAL LETTERS - COMPUTER OUTPUT & USE
R INPUT
SYSTEM INFORMATION
------------------
EACH HP2000 SYSTEM CAN SUPPORT UPTO 32
USERS IN A TIMESHARED BASIC (TSB)
ENVIRONMENT. THE SYSTEM**MU11ERUN A
VERSION OF HEWLETT PACKARD'S
TIMESHARED/BASIC 2000 (VARIOUS LEVELS).
LOGON PROCEDURE
---------------
ONCE CONNECTED TO A HP2000, TYPE A NUME
RAL FOLLOWED BY A <CR>. THE SYSTEM
SHOULD THEN RESPOND WITH: PLEASE LOG I
N. IF IT DOES NOT IMMEDIATELY
RESPOND KEEP ON TRYING THIS PROCEDURE U
NTIL IT DOES (THEY TEND TO BE SLOW
TO RESPOND).
USER ID: THE USER ID CONSISTS OF A LET
TER FOLLOWED BY 3 DIGITS, EG, H241.
PASSWORD: THE PASSWORDS ARE FROM 1 TO
6 PRINTING AND/OR NON-PRINTING (CONTROL)
CHARACTERS. THE FOLLOWING C
HARACTERS WILL NOT BE FOUND IN ANY
PASSWORDS SO DON'T BOTHER TR
YING THEM: LINE DELETE (^X), NULL (^@),
RETURN (^M), LINEFEED (^J),
X-OFF (^S), RUBOUT, COMMA (^L), SPACE
(^@), BACK ARROW (<-), & UND
ERSCORE (_). HP ALSO SUGGESTS THAT ^E
IS NOT USE IN PASSWORDS (BUT
I HAVE SEEN IT DONE!).
THE LOGON FORMAT IS: HELLO-A123,PASSWD
WHERE: HELLO IS THE LOGI
N COMMAND. IT MAY BE ABBREVIATED TO
HEL. A123 IS THE
USER ID & PASSWD IS THE PASSWORD.
THE SYSTEM WILL RESPOND WITH EITHER ILL
EGAL FORMAT OR ILLEGAL ACCESS DEPENDING
UPON WHETHER YOU SCREWED UP THE SYNTAX
OR IT IS AN INVALID USER ID OR PASSWORD.
THE MESSAGES: PLEASE LOG IN, ILLEGAL F
ORMAT, & ILLEGAL ACCESS ALSO HELP YOU
IDENTIFY HP2000 SYSTEMS.
THE SYSTEM MAY ALSO RESPOND WITH ALL PO
RTS ARE BUSY NOW - PLEASE TRY AGAIN
LATER OR A SIMILAR MESSAGE. ONE OTHER
POSSIBILITY IS NO TIME LEFT WHICH MEANS
THAT THEY HAVE USED UP THEIR TIME LIMIT
WITHOUT PAYING.
UNLIKE OTHER SYSTEMS WHERE YOU HAVE A C
ERTAIN AMOUNT OF TRIES TO LOGIN, THE
HP2000 SYSTEM GIVES YOU A CERTAIN TIME
LIMIT TO LOGON BEFORE IT DUMPS YOU.
THE SYSTEM DEFAULT IS 120 SECONDS (2 MI
NUTES). THE SYSOP CAN CHANGE IT TO BE
ANYWHERE BETWEEN 1 AND 255 SECONDS, THO
UGH. IN MY EXPERIENCE, 120 SECONDS IS
SUFFICIENT TIME FOR TRYING BETWEEN 20-3
0 LOGON ATTEMPTS WHILE HAND-HACKING &
A MUCH HIGHER AMOUNT WHEN USING A HACKI
NG PROGRAM.
USERS
-----
THE VARIOUS USERS ARE IDENTIFIED BY THE
IR USER ID (A123) & PASSWORD. USERS
ARE ALSO IDENTIFIED BY THEIR GROUP. EA
CH GROUP CONSISTS OF 100 USERS. FOR
EXAMPLE, A000 THROUGH A099 IS A GROUP,
AL"!I=U!A199 IS ANOTHER GROUP, &
Z900 THROUGH Z999 IS THE LAST POSSIBLE
GROUP. THE FIRST USER ID IN EACH GROUP
IS DESIGNATED AS THE GROUP MASTER & HEJHAS CERTAIN PRIVILEGES. FOR EXAMPLE,
A000, A100,...H200..., & Z900 ARE ALL G
ROUP MASTERS. THE USER ID A000 IS KNOWN
AS THE SYSTEM MASTER & HE HAS THE MOST
PRIVILEGES (BESIDES THE HARDWIRED SYSOP
TERMINAL). THE LIBRARY ASSOCIATED WITH
USER Z999 CAN BE USED TO STORE A HELLO
PROGRAM WHICH IS EXECUTED EACH TIME SOM
EONE LOGS ON.
SO, THE BEST THING TO HACK ON AN HP2000
SYSTEM IS THE SYSTEM MASTER (A000)
ACCOUNT. IT IS ALSO THE ONLY USER ID T
HAT MUST BE ON THE SYSTEM. HE LOGS ON BY
TYPING: HEL-A000,PASSWD. YOU JUST HAVE
TO HACK OUT HIS PASWORD. IF YOU DECIDE
TO HACK Z999, YOU CAN CREATE OR CHANGE
THE HELLO PROGRAM TO GIVE EVERY USER
YOUR OWN PERSONAL MESSAGE EVERY TIME HE
LOGS ON! THIS IS ABOUT ALL YOU CAN DO
WITH Z999 THOUGH SINCE IT IS OTHERWISE
A NON-PRIVILEGED ACCOUNT.
LIBRARY ORGANIZATION
--------------------
EACH USER HAS ACCESS TO 3 LEVELS OF LIB
RARIES: HIS OWN PRIVATE LIBRARY, A
GROUP LIBRARY, AND THE SYSTEM LIBRARY.
TO SEE WHAT IS IN THESE LIBRARIES YOU
WOULD TYPE: CATALOG, GROUP, & LIBRARY
RESPECTIVELY (ALL COMMANDS CAN BE
ABBREVIATED TO THE FIRST 3 LETTERS). T
HE INDIVIDUAL USER IS RESPONSIBLE FOR
HIS OWN LIBRARY AND MAINTANING ALL THE
FILES. IF A PROGRAM IS IN YOUR CATALOG,
THEN YOU CAN CHANGE IT.
[GROUP MASTERS]
GROUP MASTERS (GM) ARE RESPONSIBLE FOR
CONTROLING ALL PROGRAMS IN THE GROUP
LIBRARIES. ONLY MEMBERS OF THE GROUP C
AN USE THESE PROGRAMS. THESE ARE VIEWED
BY TYPING GROUP. FOR EXAMPLE, USER S50
0 CONTROLS ALL PROGRAMS IN THE GROUP
LIBRARY OF ALL USERS BEGINNING WITH ID
S5XX. OTHER USERS IN THE GROUP CANNOT
MODIFY THESE PROGRAMS. ALL PROGRAMS IN
THE GROUP LIBRARY ARE ALSO IN THE
GROUP MASTERS PRIVATE LIBRARY (CATALOG)
, THEREFORE HE CAN MODIFY THEM! THE
GROUP MASTER ALSO HAS ACCESS TO 2 PRIVI
LEGED COMMANDS. THEY ARE: PROTECT &
UNPROTECT. WITH PROTECT, THE GROUP MAS
TER CAN RENDER A PROGRAM SO IT CANNOT
BE LISTED, SAVED, CSAVED, PUNCHED TO PA
PER TAPE, OR XPUNCHED. FOR EXAMPLE, IF
THE GM TYPED PRO-WUMPUS, OTHER USERS IN
THE GROUP WOULD BE ABLE TO RUN WUMPUS
BUT THEY WOULD NOT BE ABLE TO LIST IT.
THE GM CAN REMOVE THESE RESTRICTIONS
WITH THE UNPROTECT COMMAND.
[SYSTEM MASTER]
THERE IS EXACTLY ONE SYSTEM MASTER (SM)
AND HIS USER ID IS A000. HE CAN
PROTECT & UNPROTECT PROGRAMS IN THE SYS
TEM LIBRARY. ALL USERS HAVE ACCESS TO
THESE FILES BY TYPING LIBRARY TO VIEW T
HEM. ONLY THE SYSTEM MASTER CAN MODIFY
THESE FILES SINCE HIS PRIVATE LIBRARY &
GROUP LIBRARY CONSTITUTE THE SYSTEM
LIBRARY. THE SM ALSO HAS ACCESS TO OTH
ER PRIVILEGED COMMANDS SUCH AS:
DIRECTORY: THIS COMMAND WILL PRINTOUT
ALL FILES AND PROGRAMS STOED ON THE
SYSTEM ACCORDING TO USERS.
DIR WILL PRINT OUT THE ENTIRE
DIRECTORY. DIR-S500 WILL S
TART LISTING THE DIRECTORY WITH USER
S500.
EXAMPLE:
DIR
BOCES ED 1 053/84 1243
ID NAME DATE LENGTH DISC
DRUM
A000 ALPHA 043/84 00498 001384
BCKGMN 053/84 04564 001526
FPRINT 053/84 00567 002077
STOCK 038/84 04332 002753
TFILE 020/83 F 00028 002804
WUMPUS 053/84 P 02636 003142
B451 BLJACK 316/75 03088 011887
GOLF 316/75 02773 011911
S500 GIS 050/84 C 03120 019061
GISCL4 050/84 F 03741 022299
Z999 HELLO 021/84 00058 011863
IN THIS EXAMPLE, THE SYSTEM NAME IS BOC
ES ED 1. THE DATE OF THE PRINTOUT IS
THE 53RD DAY OF 1984 (053/84) AND THE T
IME IS 12:43 (24-HR). THE FILES
APPEARING UNDER A000 ARE THOSE IN THE S
YSTEM LIBRARY. THE DATE ASSOCIATED WITH
THE PROGRAM IS THE DATE IT WAS LAST REF
ERENCED. THE LENGTH IS HOW LONG IT IS
IN WORDS. DISC REFERS TO ITS STORAGE B
LOCK LOCATION ON ONE OF THE HARD DRIVES.
DRUM REFERS TO ITS LOCATION ON THE DRUM
STORAGE UNIT. ONLY SANCTIFIED PROGRAMS
ARE STORED ON A DRUM TO INCREASE THEIR
ACCESS TIME. THE LETTERS AFTER THE DATE
REFER TO F IF IT IS A FILE, P MEANS IT
IS PROTECTED, AND C MEANS THE PROGRAM IS
COMPILED. IN THE EXAMPLE THE SYSTEM PR
OGRAM, WUMPUS, WAS LAST USED ON THE 53RD
DAY OF 1984 (2-22-84); IT IS CURRENTLY
UNLISTABLE (PROTECTED) AND IT OCCUPIES
2636 WORDS OF MEMORY STARTING AT DISC B
LOCK 3142. THE COMMAND SDIRECTORY WILL
PRINT OUT PROGRAMS THAT ARE ONLY STORED
ON DRUM. MOST SYSTEM DIRECTORIES ARE
USUALLY LONGER THAN THE EXAMPLE. THE A
BOVE EXAMPLE IS AN ABRIDGED VERSION OF A
43 PAGE DIRECTORY! THE <BREAK> KEY WIL
L STOP THE LISTING IF NECESSARY.
REPORT
THE REPORT COMMAND WILL SHOW THE USER I
D, HOW MUCH TERMINAL TIME THEY HAVE USED
SINCE THE LAST BILLING PERIOD (IN MINUT
ES), AND HOW MUCH DISC SPACE THEY ARE
USING.
EXAMPLE:
REPORT
BOCES ED 1 055/84 1905
ID TIME SPACE ID TIME SPACE
I TIME SPACE
A000 01150 12625 B451 00003 05861
B864 00000 00000
S500 00235 06861 S543 00421 00000
Z999 00000 00058
THE ADVANTAGE OF HACKING THE A000 PASSW
ORD FIRST IS THAT YOU CAN USE THE
PRIVILEGED COMMANDS TO SEE WHICH WHICH
USER ID'S EXIST AND WHAT PROGRAMS ARE
STORED WHERE SO THAT YOU CAN FURTHER PE
NETRATE THE SYSTEM.
PORT
THIS COMMAND TELLS THE CHARACTER SIZE A
ND BAUD RATE AT WHICH EACH OF THE 32
PORTS ARE CONFIGURED. IT IS IN THE FOR
MAT C-BBB, WHERE C=CHARACTER SIZE &
BBB=BAUD RATE. IT IS SET UP IN COLUMNS
OF 8. THE FIRST ROW CORRESPONDS TO
PORTS 0-7, THE SECOND ROW CORRESPONDS T
O 8-15, ETC. THIS IS GENERALLY USELESS
IN MY OPINION. ALSO, THE PORTS ARE USU
ALLY ONLY CONFIGURED SEPARATELY IF THE
TERMINALS ARE ALL HARD-WIRED.
STATUS
THIS COMMAND ALLOWS THE SM TO VIEW INFO
RMATION CONCERNING THE MASS-STORAGE
DEVICES. IT GIVES CURRENT LOCATIONS OF
THE ID TABLE, USER SWAP AREAS, LINE
PRINTER STATUS, ETC. IT TENDS TO HOLD
ALOT OF INFO IF IT IS READ CORRECTLY.
UNFORTUNATELY, I DON'T HAVE THE ROOM TO
FULLY DISCUSS IT HERE.
SINCE ALL LOGINS & LOGOUTS ARE PRINTED
AT THE SYSTEM CONSOLE ALONG WITH OTHER
PERTINENT INFORMATION, I WOULD STRONGLY
SUGGEST THAT YOU AVOID EXTENSIVE USE OF
AN A000 PASSWORD IF YOU FIND ONE.
THE SYSTEM OPERATOR HAS ACCESS TO ALOT
OF OTHER COMMANDS. UNFORTUNATELY, HE IS
SITUATED AT THE SYSTEM CONSOLE WHICH IS
HARD-WIRED TO THE COMPUTER. IF ANYONE
FIGURES OUT A WAY TO GIVE A REMOTE USER
SYSOP PRIVILEGES, LET ME KNOW & I CAN
HELP YOU WITH HIS COMMANDS.
NON-PRIVILEGED COMMANDS
-----------------------
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
LIBRARY - LISTS THE SYSTEM PROGRAMS. T
HERE IS ONLY 1 SYSTEM LIBRARY & ANY USER
CAN ACCESS IT.
EXAMPLE:
LIBRARYTO RETRIEVE A PROGRAM FROM THESYSTEM LI
BRARY, YOU WOULD TYPE:
GET-NAME (TO LOAD THE STOCK PRO
GRAM, YOU WOULD TYPE GET-STOCK)
YOU CAN THEN RUN OR LIST IT. IF YOU AT
TEMPTED TO LIST WUMPUS WHICH IS
PROTECTED (P), IT WOULD SAY RUN ONLY.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
GROUP - LISTS ALL FILES IN YOUR GROUP.
IT IS IN THE SAME FORMAT AS THE LIBRARY
=5599
TO RETRIEVE A PROGRAM FROM YOUR GROUP L
IBRARY, YOU WOULD TYPE:
GET-*NAME
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
CATALOG - LISTS ALL FILES IN YOUR PERSO
NAL LIBRARY. IT IS ALSO IN THE SAME
FORMAT AS THE LIBRARY COMMAND
.
TO RETRIVE A PROGRAM IN YOUR PERSONAL L
IBRARY, YOU WOULD TYPE:
GET-NAME
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
OTHER COMMANDS YOU CAN USE WITH YOUR PE
RSONAL FILES (OR SYSTEM FILES IF LOGGED
ON AS A000) INCLUDE:
RUN RUNS THE PROGRAM IN THE
USER SWAP AREA (MEMORY)
LIST LISTS THE PROGRAM IN TH
E USER SWAP AREA
SAVE-NAME NAME MAY BE UPTO 6 CHAR
ACTQ**HHMY5NAME SAVE IN COMPILED FORM
NAME-NAME ASSIGN A NAME TO IT
KILL-NAME DELETES A FILE FROM YOU
R LIBRARY
PUNCH PUNCHES A PROGRAM ONTO
PAPER TAPE
TAPE INPUT A PAPER TAPE
APPEND-NAME ATTACHES THE FILE NAME
TO CURRENT PROGRAM IN MEMORY
LENGTH TELLS THE CURRENT LENGT
H OF PROGRAM IN MEMORY
LPRINTER DESIGNATES THE LINE PRI
NTER AS USER OUTPUT DEVICE
OPEN CREATES A FILE [OPEN-FI
LE,# OF RECORDS, (RECORD LENGTHS)]
RENUMBER RENUMBERS STATEMENTS
[REN-(1ST STATEMENT #),
(INTERVAL BETWEEN STATEMENTS),(# TO
START RENUMBERING AT),
(# TO END RENUMBERING)]
NOTE: ALL COMMANDS CAN BE ABBREVIATED
TO THE FIRST 3 DIGITS. THE MAIN COMMAND
IS SEPARATED FROM THE FIRST PARA
METER BY A DASH (-), THE FIRST PARAMETER
IS SEPARATED BY THE SECOND PARAM
ETER BY A COMMA (,), AND ALL FURTHER
PARAMETERS ARE SEPARATED BY COMM
AS. EG, HEL-A000,^C(I DID ACTUALLY
FIND A SYSTEM WHERE THE SM PASSW
ORD WAS ^C).
OTHER USEFUL COMMANDS
---------------------
BYE LOGS USER OFF
ECHO-ON HALF-DUPLEX
-OFF FULL-DUPLEX (DEFAULT)
SCRATCH1IMUSERS SWAP AREA
(NEW)
KEY TRANSFERS CONTROL TO KE
YBOARD
TIME INFORMS USER OF TOTAL C
ONNECT TIME & CONSOLE TIME
MESSAGE SENDS A MESSAGE TO SYSO
P CONSOLE [MES-(TEXT UPTO 68 CHARS)]
TSB 2000
--------
THE PROGRAMMING OF THE SYSTEM IS ABOVE
THE SCOPE OF THIS TUTORIAL. IF YOU DO
MANAGE TO GET INTO THE A000 OR Z999 ACC
OUNTS, THERE IS SUFFICIENT INFO
PROVIDED IN THIS TEXT TO HELP YOU MANIP
ULATE THE DATA. THE BASIC IS RATHER
EXTENSIVE. THE FILE COMMANDS ARE EXCELL
ENT & YOU CAN MASK FILES SO THAT NOBODY
CAN READ THEM WITHOUT THE PROPER MASK (
I HAVE ALREADY CRACKED THIS CODE,
THOUGH!). BRIEFLY, IT IS SIMILAR TO MOS
T OTHER BASIC'S. IF YOU WANT, ORDER
THEIR PROGRAMMING MANUAL. IT IS CALLED
20854A TIMESHARED BASIC/2000, LEVEL F
(PART # 02000-90073).
NOTE: THERE ARE DIFFERENT LEVELS (VERS
IONS) OF TSB/2000. THIS ARTICLE IS
BASED PRIMARILY ON LEVEL F. MOS
T OF THE LEVELS ARE SIMILAR IN THEIR
COMMANDS SO THE DIFFERENCES SHOU
LD NOT AFFECT THE HACKER. ALSO, SOME
SYSTEMS ARE CUSTOMIZED. EG, ONE
SYSTEM I KNOW DOESN'T HAVE THE MESSAGE
COMMAND BECAU*_"!EDON'T WANT
THE OPERATOR BOTHERED WITH MESSAGES.
ANOTHER SYSTEM SAYS ??? INSTEAD
OF PLEASE LOG IN AND ILLEGAL INSTEAD OF
ILLEGAL ACCESS. THESE ARE ONLY
TRIVIAL PROBLEMS, THOUGH.
PROGRAMS
--------
HEWLETT-PACKARD OFTEN SUPPLIES PROGRAMS
FROM THEIR TSB LIBRARY FOR THE SYSTEMS.
UTILITIES SUCH AS ASCII*, FPRINT, & OTH
ERS ARE ALMOST INEVITABLY FOUND ON
EVERY SYSTEM. STANDARD GAMES SUCH AS W
UMPUS, STOCK, LUNAR, & MANY OTHERS ARE
ALSO A "SYSTEM OUST." OTHER COMPANIES
OFFER VERY LARGE PROGRAMS FOR THE
HP2000 ALSO. GIS (GUIDANCE INFORMATION
SYSTEMS) IS A DATABASE TO HELP GUIDANCE
COUNSELORS HELP STUDENTS TO SELECT COLL
EGES, JOBS, FINANCIAL AID, ETC. GIS IS
USUALLY FOUND IN TH S5XX GROUP LIBRARY
(ANYONE WITH AN S5XX PASSWORD CAN USE
IT). UNFORTUNATELY, SOMETIMES THESE PR
OGRAMS ARE SET SO THAT A CERTAIN
PASSWORD WILL AUTOMATICALLY RUN THEM.
IN SOME CASES YOU CAN ABORT BY PRESSING
THE <BREAK> KEY. THERE IS A BASIC FUNC
TION [X=BRK(0)] THAT DISABLES THE
<BREAK> KEY. IN THIS CASE, ONLY THE SY
SOP OR THE PROGRAM CAN THROW YOU INTO
BASIC.
THERE ARE MANY ALLEGED BUGS ON THE HP20
00 THAT ALLOW USERS TO DO ALL SORTS OF
THINGS. IF YOU RUN ACROSS ANY OF THESE
BE SURE TO LET ME KNOW.
I HAVE SEEN ONE SYSTEM THAT CONSISTED O
F 2 HP2000'S RUNNING TOGETHER. IN THIS
CASE, THE MULTIEAIWOULD FIRST ASK T
HE USER SYSTEM 1 OR SYSTEM 2? BEFORE
LOGGING IN. YOU WOULD THEN TYPE SYS1 O
R SYS2.
MOST OF THE HP2000 SYSTEMS ARE USED BY
SCHOOLS, SCHOOL DISTRICTS, BOCES,
AND VARIOUS BUSINESSES. THIS WAS AN ID
EAL SYSTEM FOR SCHOOLS BEFORE MICRO-
COMPUTERS EXISTED. THE HP2000 SYSTEM H
AS BEEN IN EXISTANCE SINCE AROUND 1973.
IT HAS BEEN REPLACED BY THE HP3000 BUT
THERE ARE STILL MANY HP2000 SYSTEMS IN
EXISTANCE & I BELIEVE THAT THEY WILL ST
AY THERE FOR AWHILE.
HERE ARE THE DIAL-UPS TO A FEW HP2000 S
YSTEMS TO GET YOU STARTED:
[314/645-1289]
[203/622-1933]
[312/398-8170]
IF YOU NEED HELP WITH ANYTHING ON AN HP
2000 OR FIND OTHER HP2000 SYSTEMS, FEEL
FREE TO ASK ME. ANY COMMENTS, CORRECTI
ONS, AND/OR THREATS ARE ALSO WELCOME.
YOURS TRULY,
*****BIOC
*==*AGENT
*****003
<<=-FARGO 4A-=>>
(P) APRIL 8, 1984 [THE YEAR OF BIG BRO
THER]
SHERWOOD FOREST ][ - (914) 359-1517
RACS III - (914) 942-2638
PS SYSOPS OF OTHER BBS'S ARE WELCOME TO
USE THIS MATERIAL ON THEIR BOARD
PROVIDING THEY DO NOT ALTER ANYTHING
.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Downloaded from P-80 Systems.....
TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2024 AOH
